Genex Format; Fat32 - Genex GX9000 User Manual

GX9000 User manual
Clock (Sample) Rate (PCM Only) Clock (Sample) Rate (PCM Only)
Clocks
.SmplRte
32000Hz
44100Hz
48000Hz
88200Hz
96000Hz
176400Hz
192000Hz

Genex Format

Genex Format

FAT32

FAT32
Genex Audio Inc Genex Audio Inc
Rev 2.1
In PCM mode it's also necessary to match the clock rate of the GX9000 to In PCM mode it's also necessary to match the clock rate of the GX9000 to
the incoming clock rate. Use the sample rate menu heading in the setup the incoming clock rate. Use the sample rate menu heading in the setup
menu. In DSD mode, the word clock rate is fixed at 44.1kHz. menu. In DSD mode, the word clock rate is fixed at 44.1kHz.
• •
Press the Setup Button Press the Setup Button
• •
Use the Rotary Wheel to select the Use the Rotary Wheel to select the
• •
Press the Parameter Down button and use the Rotary Wheel to select Press the Parameter Down button and use the Rotary Wheel to select
SmplRte SmplRte
the . the . heading. heading.
• •
Use the Value Up and Value Down Buttons to select a sample rate. Use the Value Up and Value Down Buttons to select a sample rate.
In DSD, this is the only permitted setting
• •
Press the Enter button to confirm the selection. Press the Enter button to confirm the selection.
When a non blank disk is loaded, the sample rate is automatically switched to When a non blank disk is loaded, the sample rate is automatically switched to
match the sample rate on the disk. You can then select any sample rate for match the sample rate on the disk. You can then select any sample rate for
playback but the playback but the .SmplRte .SmplRte
sample rate does not match the originally recorded disk sample rate. sample rate does not match the originally recorded disk sample rate.
When a project is opened, the output sample rate is automatically switched to When a project is opened, the output sample rate is automatically switched to
match the sample rate on the disk. You can then select any sample rate for match the sample rate on the disk. You can then select any sample rate for
.SmplRte .SmplRte
playback but the playback but the
sample rate does not match the disk sample rate. sample rate does not match the disk sample rate.
Clocks Clocks
menu. menu.
heading will flash to indicate that the selected heading will flash to indicate that the selected
heading will flash to indicate that the selected heading will flash to indicate that the selected
Clocks s
Page 35 Page 35