CD-S2000
I UPDATING FIRMWARE / ファームウェアの書き込み
Writing to the microprocessor
After replacing the following parts with the replacement
parts, update the latest firmware according to the following
procedure.
DIGITAL P.C.B.
Microprocessor (IC302) of DIGITAL P.C.B.
G Required tools
•
Program downloader programs
................................................... FlashSta.exe
•
Firmware
.................................................. CDS2000xx.S
................................................. CDS2000xx.id
•
RS232C cross cable "D-sub 9 pin female"
(Specifications)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
•
RS232C conversion jig (Part No.: AAX88050)
G Preparation and precautions before starting
the operation
•
Download firmware downloader program and
firmware from the specified source to the same
folder of the PC.
•
Prepare the above specified RS232C cross
cable.
•
While writing, keep the other application software
on the PC closed.
It is also recommended to keep the software on
the task tray closed as well.
18
下記の部品をサービス部品に交換した場合、下記の手順
により最新のファームウェアの書き込みを行ってくださ
い。
DIGITAL P.C.B.
DIGITAL P.C.B.のマイコン (IC302)
● 必要なツール
・ プログラム書き込み用プログラム
・ ファームウェア
・ RS232Cクロスケーブル "D-sub 9pinメス"
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
・ RS232C 変換冶具 (部品番号:AAX88050)
● 操作前の準備と注意
・ PCへ指定のダウンロード先からファームウェア書
・ RS232Cクロスケーブルは必ず上記仕様のものを
・ 書き込み時は、PC上の他のアプリケーションソフ
マイコンへの書き込み
................................................... FlashSta.exe
.................................................. CDS2000xx.S
................................................. CDS2000xx.id
(仕様)
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS
き込み用プログラムおよび、ファームウェアを同
じフォルダにダウンロードしてください。
用意してください。
トは閉じてください。
さらに、タスクトレイ上にあるソフトも閉じてお
くことを推奨します。
Pin No.2 RxD
Pin No.3 TxD
Pin No.5 GND
Pin No.7 RTS
Pin No.8 CTS