Transmit-Interval; Tunneling; Egress-Rate; Encap-Type - Alcatel-Lucent 7750 SR OS Interface Configuration Manual

Configuration Commands

transmit-interval

Syntax [no] transmit-interval interval [multiplier multiplier]
Context config>port>ethernet>efm-oam
Description This command configures the transmit interval of OAM PDUs.
Parameters interval — Specifies the transmit interval.
multiplier multiplier — Specifies the multiplier for transmit-interval to set local link down timer.

tunneling

Syntax [no] tunneling
Context config>port>ethernet>efm-oam
Description This command enables EFM OAM PDU tunneling. Enabling tunneling will allow a port mode Epipe
SAP to pass OAM frames through the pipe to the far end.
The no form of the command disables tunneling.

egress-rate

Syntax egress-rate sub-rate
no egress-rate
Context config>port>ethernet
Description
This command configures the rate of traffic leaving the network.
The no form of this command returns the value to the default.
Default no egress-rate
Parameters
sub-rate — The egress rate in Kbps.

encap-type

Syntax encap-type {dot1q | null | qinq}
no encap-type
Context config>port>ethernet
Page 226
Values
1 — 600 (in 100 milliseconds)
Values
2 — 5
Values 1 — 10000000 kbps
7750 SR OS Interface Configuration Guide