Configuring Ip Address Of The Printer Driver - Epson TM-T20II Software User Manual

TM-T20II Software Installer
C
The Update Software screen appears. Click the Next button.
D
The Select Software screen appears. Check the Sample and Manual checkbox and click the Next button.
Clear the checkbox for the drivers or utilities that you do not install here.
E
The Start Installation screen appears. Click the Install button.
F
The EPSON APD5 Sample&Manual - InstallShield Wizard screen appears, click the Next button.
G
The License Agreement screen appears. Read the content and select the I accept the terms in the license
agreement. Then click the Next button.
H
The Ready to Install the Program screen appears. Click the Install to install the sample programs and manual
of Advanced Printer Driver.
I
The InstallShield Wizard Complete screen appears. Click the Finish button.
J
The Installation Finished screen appears. Click the Finish button to finish the installation.
This is the end of the installation of the Advanced Printer Driver manual.

Configuring IP Address of the Printer Driver

The following explains how to configure the printer's IP address for the installed printer driver. This will change the
Epson port setting.
A
Select from Start - Control Panel - Hardware and Sound and open Printers and then right click the target
printer driver and select Properties.
U See "Differences Depending on the OS" on page 9
Software User's Manual
Installation
20