Download Print this page

Prusa i3 Hephestos Settings Manual

Hide thumbs Also See for i3 Hephestos:

Print Settings

Table of Contents

Need help?

Do you have a question about the i3 Hephestos and is the answer not in the manual?

Page 1 Print Settings...
Page 2 Z axis settings Before commencing the printing process you need to adjust the screw that regulates the height of the Z axis, so that the extruder is positioned at the correct distance from the bed. To do so, follow the steps below: 1 Balance the ends of the X axis, using the screw to manually adjust each axis until they are both at the same height.
Page 3 Once you have adjusted the Z axis you need to level the bed, so that it is totally parallel to the X axis: 1 Start the levelling process by selecting the Control > Level plate options on the LCD control panel. Important You can watch the videos on how to level the Z axis and the print bed here: bq.com/gb/products/prusa-hephestos.html...
Page 4 Printing your first object If you have followed all the steps in the manual, your Prusa i3 Hephestos will now be ready to print its first object! First, you need to divide the 3D design (the .stl file) of the object you want to print into layers. To...