Section 2: Hardware And Software Setup; Installing Label Stock - Primera LX400 User Manual

TOC
Section 2: Hardware and Software
A. INSTALLING LABEL STOCK
Your printer will utilize a wide variety of paper label stock.
As long as the label stock is paper and can receive ink jet
printing and is within the
allotted size, it will work in
the printer. Primera carries
a large variety of paper
label stock that has been
converted and ready for
use with your printer.
1. Open the Top Cover.
2. Pull the spring loaded
label stock guide out
far enough to fit the
label stock.
3. Remove any shipping tape from your label stock roll to
ensure that it can unroll freely, making certain that no
adhesive portion is exposed. It is important to note that
any exposed adhesive surface can attach itself the inner
workings of the print mechanism and cause a media jam.
Note: If you are using fan-fold label stock or label stock other than standard
square / rectangular die cut labels before continuing see Sections 2F
and 2G for additional instructions.
Stock Guide Rollers
Setup
Hardware and Software Settings
Label Stock Guide
INDEX
5