Load reduction mode Energy economy mode
System which manages the use of certain
functions according to the level of charge
remaining in the battery.
When the vehicle is being driven, the load
reduction function temporarily deactivates
certain functions, such as the air conditioning,
the heated rear screen...
The deactivated functions are reactivated
automatically as soon as conditions permit.
System which manages the duration of use of certain functions to conserve a sufficient level of
charge in the battery.
After the engine has stopped, you can still use functions such as the audio and telematics
system, windscreen wipers, dipped beam headlamps, courtesy lamps, etc. for a maximum
combined duration of thirty minutes.
This period may be greatly reduced if the battery is not fully charged.
Switching to economy mode
Once this time has elapsed, a message
appears in the screen indicating that the
vehicle has switched to economy mode and the
active functions are put on standby.
If the telephone is being used at this
time:
-
it will be maintained for 5 minutes
with the hands-free kit of your
PEUGEOT Connect Sound or
PEUGEOT Connect Navigation,
-
it will still be possible to finish the
call with the PEUGEOT Connect
Media.
Practical information
Exiting economy mode
These functions are reactivated automatically
next time the vehicle is driven.
To restore the use of these functions
immediately, start the engine and let it run for at
least 5 minutes.
Let the engine run for the duration
specified to ensure that the battery
charge is sufficient.
Do not repeatedly and continuously
restart the engine in order to charge the
battery.
A flat battery prevents the engine
from starting (refer to the "Battery"
paragraph).
10
249
Need help?
Do you have a question about the 5008 and is the answer not in the manual?
Questions and answers
Position of oil filter in 2019 5008 gt line diesel automatic
The oil filter on a 2019 Peugeot 5008 GT Line diesel automatic is located underneath the vehicle. It is near a large silver pipe, and access requires removing several bolts from the sump cover.
This answer is automatically generated