Sanyo PLC-XT10 Service Manual
  1. Manuals
  2. Brands
  3. Sanyo Manuals
  4. Projector
  5. PLC-XT10
  6. Service manual
Sanyo PLC-XT10 Service Manual

Sanyo PLC-XT10 Service Manual

Hide thumbs Also See for PLC-XT10:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Owner's Manual

SERVICE MANUAL

PRODUCT CODE
1 122 163 00
(MD3A)
1 122 164 00
(PD3A)
1 122 164 02
(PD3C)
Multimedia Projector
FILE NO.
Model No. PLC-XT10
Original Version
Chassis No. MD3-XT1000
NOTE: Match the Chassis No. on the unit's
back cover with the Chassis No. in the
Service Manual.
If the Original Version Service
Manual Chassis No. does not match
the
unit's,
additional
Literature is required.You must refer to
"Notices" to the Original Service
Manual prior to servicing the unit.
REFERENCE NO.
U.S.A., Canada,
Europe, Asia, Africa
Service
SM
5110412

Advertisement

Table of Contents
loading

Related Manuals for Sanyo PLC-XT10

Summary of Contents for Sanyo PLC-XT10

  • Page 1: Service Manual

    FILE NO. SERVICE MANUAL Multimedia Projector Model No. PLC-XT10 U.S.A., Canada, Europe, Asia, Africa Original Version Chassis No. MD3-XT1000 NOTE: Match the Chassis No. on the unit’s back cover with the Chassis No. in the Service Manual. If the Original Version Service Manual Chassis No.

  • Page 2: Table Of Contents

    ■ Contents ■ Safety Instructions ________________________________________________3 ■ Specifications____________________________________________________4 ■ Adjustments after Parts Replacement ________________________________5 ■ Circuit Protections ________________________________________________6 Fuse ______________________________________________________6 Thermal switch ______________________________________________6 Interlock switch ______________________________________________6 Warning temperature and power failure protection __________________7 ■ Mechanical Disassemblies ________________________________________8 ■ Optical Parts Disassemblies ______________________________________13 ■...

  • Page 3: Safety Instructions

    ■ Safety Instructions SAFETY PRECAUTIONS WARNING: The chassis of this projector is isolated (COLD) from AC line by using the converter transformer. Primary side of the converter and lamp power supply unit circuit is connected to the AC line and it is hot, which hot circuit is iden- tified with the line ( ) in the schematic diagram.

  • Page 4: Specifications

    ■ Specifications Projector Type Multi-media Projector Dimensions (W x H x D) 11.9" x 6.4" x 16.6" (302mm x 162mm x 422mm) (not including Adjustable Feet) Net Weight 17.2 lbs (7.8 kg) LCD Panel System 0.99” TFT Active Matrix type, 3 panels Panel Resolution 1024 x 768 dots Number of Pixels...

  • Page 5: Adjustments After Parts Replacement

    ■ Adjustments after Parts Replacement ● ❍ : Adjustment necessary : Check necessary Disassembly / Replaced Parts LCD/ Polarized glass Power DC Condenser Relay Prism Mirror Main Board Lens Lens Board Ass’y ❍ ● Condenser lens adjustment ❍ ● Relay lens adjustment ●...

  • Page 6: Circuit Protections

    ■ Circuit Protections This projector provides the following circuit protections to operate in safety. If the abnormality occurs inside the pro- jector, it will automatically turn off by operating one of the following protection circuits. ● Fuse Line Filter Board Fuse The fuse is located inside of the projector.

  • Page 7: Warning Temperature And Power Failure Protection

    Circuit Protections ● Warning temperature and power failure protection The projector will be automatically turned off when the internal temperature of the projector exceeds the normal oper- ating temperature, or the cooling fans stops, or the power supplies in the projector are failed. - If the TEMP WARNING indicator (red) is flashing, it may detect the abnormal temperature inside the projector.

  • Page 8: Mechanical Disassemblies

    ■ Mechanical Disassemblies Mechanical disassemble should be made following procedures in numerical order. Following steps show the basic procedures, therefore unnecessary step may be ignored. Caution: The parts and screws should be placed exactly the same position as the original otherwise it may cause loss of performance and product safety.
  • Page 9 Mechanical Disassemblies Main Board & Thermal-SW removal Remove 1 screw (M3x6) to take the thermal SW905 Main Board switch(SW905). Remove 5 screws (M3x6) to take the Main Board upward. AV Board COM Board Rear Panel Ass’y AV, COM Board & Rear Panel removal Fig.2 Remove 1 screw (M4x10) and take the Rear Panel...
  • Page 10 Mechanical Disassemblies Speaker base removal Remove 4 screws (T3x10) and then remove the Speaker Base. Speaker Base Fig.4 Optical Unit removal Loosen 1 screw on the lamp cover and 2 screws the lamp house and the take the Lamp House off from the cabinet bottom.
  • Page 11 Mechanical Disassemblies Fan & Motor removal Remove 4 screws (T3x20) to take the fan (FN904) off. Remove 3 screws (T4x25) to take the fan (FN907) off. Remove 4 screws (T3x10) to take the duct ass’y off. FN904 Remove 2 screws (T3x6) to take the Lens Shift Motor and Sensor SW Holder from the Base.
  • Page 12 Mechanical Disassemblies Power AC Board removal Power AC Remove 4 screws ( T3x6) to take the Power Board off. Board Remove 4 screws (T3x10) to take the Holder from the cabinet bottom. Line Filter Board & Interlock SW removal Remove 3 screws (T3x10) to take the Filter Board Ass’y upward.

  • Page 13: Optical Parts Disassemblies

    ■ Optical Parts Disassemblies Before taking this procedure, remove Cabinet Top and Main Board following to the “Mechanical Disassemblies”. Disassembly requires a 2.0mm hex wrench. Projection Lens removal Shift the projection lens to the end of top position by pressing Note in the Mounting Projection the Lens Shift (+) button.
  • Page 14 Optical Pats Disassemblies Prism ass’y removal and disassembly Remove 4 hex screws and take the LCD/Prism ass’y off upward. Remove each 1 screw and take the Glass Holder, and then pull the Optical filter, Polarized Glass-Out upwards off. These glasses are mounted for R, G and B LCD panels respectively.
  • Page 15 Optical Parts Disassemblies Relay Lens disassembly Remove 2 hex screws and pull the Relay Lens ass’y upward. Remove 2 screws to take the Lens off from the holder. Note: There is no mounting direction of the lens. Holder Relay Lens Fig.4- Fig.4- Integrator-In disassembly...
  • Page 16 Condenser Lens disassembly Remove 2 hex screws and take the Condenser Lens ass’y. Remove 4 screws to take the Lens off from the holder. * Lens should be placed as the flat surface side comes to the holder side. Holder Condenser Lens Fig.6- Fig.6-...
  • Page 17 Optical Parts Disassemblies Key No. Description Locations and Directions Slit-Int When the optical parts in the optical unit mounting or assembling, the Integrator Lens-Out parts must be mounted in the specified location and direction as PBS (Prism Beam Splitter) shown in figure below. Mirror (W-Cold) Note: The arrow in the figure below is indicated that there is the direc- Condenser lens-Out...

  • Page 18: Lcd Panel/Prism Ass'y Replacement

    ■ LCD Panel/Prism Ass’y Replacement IMPORTANT NOTICE on LCD Panel/Prism Ass'y Replacement LCD panels used for this model can not be replaced separately. Do not disassemble the LCD Panel/Prism Ass’y. These LCD panels are installed with precision at the factory. When replacing the LCD panel, should be replaced whole of the LCD panels and prism ass’y at once.

  • Page 19: Lamp Replacement

    ■ Lamp Replacement WARNING: ORDER REPLACEMENT LAMP - For continued safety, replace with a lamp assembly of the same type. Type No. Service Parts No. - Allow the projector to cool for at least 45 minutes before you open the POA-LMP48 610 301 7167 lamp cover.

  • Page 20: Optical Adjustments

    ■ Optical Adjustments Before taking optical adjustments below, remove the Cabinet Top and Main Board, if required, following to the “Mechanical Disassemblies” Adjustments require a 2.0mm hex wrench and a slot screwdriver. Note: Do not disconnect connectors K8E, K8F, K8G, K8J and K8K on the main board, because the projector can not turn on due to operate the power failure protection.
  • Page 21 Optical Adjustments Condenser Lens adjustment Turn the projector on by a state of without FPC cables. Adjust the adjustment base of condenser lens ass’y to make color uniformity in white. 1) If the shading appears on the left or right of the screen as White shown in Fig.2-1, loosen 2 screws with the 2.0mm hex driv-...
  • Page 22 Optical Adjustments Relay Lens-Out adjustment Turn the projector on by a state of without FPC cables. Adjust the adjustment base of relay lens ass’y to make color unifor- mity in white. 1) If the shading appears on the left or right of the screen as shown in Fig.3-1, loosen 2 screws with the 2.0mm hex driver, and White...
  • Page 23 Optical Adjustments Mirror adjustment Turn the projector on by a state of without FPC cables. Adjust the adjustment base of mirror to make color uniformity in white. 1) If the shading appears on the left or right of the screen as shown in Fig.4-1, loosen 2 screws with the 2.0mm hex driver, and White...

  • Page 24: Electrical Adjustments

    ■ Electrical Adjustments ● Service Adjustment Menu Operation To enter the service mode To enter the “Service Mode”, press and hold the MENU and IMAGE button on the projector at the same time for more than 3 seconds. The service menu appears on the screen as follows. To adjust service data Select the adjustment group no.

  • Page 25: Circuit Adjustments

    Electrical Adjustments ● Circuit Adjustments CAUTION: The each circuit has been made by the fine adjustment at factory. Do not attempt to adjust the follow- ing adjustments except requiring the readjustments in servicing otherwise it may cause loss of per- formance and product safety.
  • Page 26 Electrical Adjustments NRS adjustment Video Gain adjustment [PC] 1. Receive the 16-step gray scale computer signal with 1. Receive the 16-step gray scale computer signal with Computer 1 [Analog RGB] mode. Computer 1 [Analog RGB] mode. 2. Enter the service mode. 2.
  • Page 27 Electrical Adjustments Luminance adjustment adjustment [PC] Pedestal adjustment [Video] 1. Receive the 100%whole-white computer signal with 1. Receive the 100%whole-Black composite video sig- Computer 1 [Analog RGB] mode. nal with Video mode. 2. Enter the service mode. 2. Enter the service mode. TP531 3.
  • Page 28 Electrical Adjustments A/D Input adjustment [Component] Pedestal adjustment [Component] [1080i-A/D INPUT ADJUSTMENT] [1080i-PEDESTAL ADJUSTMENT] 1. Receive the 16-step gray scale component signal 1. Receive the 100%whole-Black component signal [1080i] with Video [Y/Pb,Pr/Cb,Cr] mode. [1080i] with Video [Y/Pb,Pr/Cb,Cr] mode. 2. Enter the service mode. 2.
  • Page 29 Electrical Adjustments Video Gain adjustment [Component] White Balance adjustment 1. Receive the 16-step gray scale component signal [PC WHITE BALANCE ADJUSTMENT] [1080i] with Video [Y/Pb,Pr/Cb,Cr] mode. 1. Receive the 100%-whole white computer signal with 2. Enter the service mode. Computer 1 [Analog RGB] mode. TP531 3.

  • Page 30: Test Points And Locations

    Electrical Adjustments Test Points and Locations ● MAIN BOARD TP2561 TP501 TP561 TPFAN1 TP13B TPFAN2 TP2531 TP13G TPFAN3 K25G TP13R TPGVRT TP531 TPVRB TPDVS TPDHS IC9401 IC3201 TPHD TPVD TPGHS TPGVS IC801 IC341 IC6361 TPHS TP21G TP21B TPVS TP21R -30-...

  • Page 31: Service Adjustment Data Table

    Electrical Adjustments ● Service Adjustment Data Table These initial values are the reference data written from the CPU ROM to memory IC when replaced new memory IC. The adjust- ment items indicated with “✻” are required to readjust following to the “Electrical adjustments”. Other items should be used with the initial data value.
  • Page 32 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description LTI_LEVEL 1/1/0/0 0 ~ 3 NT,NT443,PAL,SECAM,PALM,PALN,480i,575i/ 480p,575p / 1080i60,1035i,720p/ 1080i50 D_PIC 0/0/1/1 0 ~ 3 NT,NT443,PAL,SECAM,PALM,PALN,480i,575i/ 480p,575p / 1080i60,1035i,720p/ 1080i50 31/31/31 0 ~ 63 PAL,PALM,PALN,PAL60,SECAM/ 575i,575p, only possible to adjust in these mode SUB_COL 7/7/7/8/6/9 0 ~ 15...
  • Page 33 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description R_BLK_DC 80/80/80 0 ~ 255 AV Pedestal Adjustment video/1080i,1035i,720p/480p,525p ✻ 0 ~ 255 dac3 A/D Ref Voltage Adjustment {BOTTOM] ✻ GVRT 0 ~ 255 dac2 A/D Ref Voltage Adjustment [TOP] BVRT 0 ~ 255 dac2...
  • Page 34 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description HINOR_VALU_FAN2_MIN 0~255 FAN2 control minimum value, HighLand Normal HINOR_VALU_FAN2_MAX FAN2 control maximum value, HighLand Normal HINOR_VALU_FAN3_MIN FAN3 control minimum value, HighLand Normal HINOR_VALU_FAN3_MAX FAN3 control maximum value, HighLand Normal HIECO_TEMP_FAN1_MIN FAN1 temperature to start the control, HighLand Eco HIECO_TEMP_FAN1_MAX...
  • Page 35 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description IMAGE_IN_SIZE_V, 249/293/488/ 0 ~ 1023 009/010 587/545/545/ 725/249/293 CLAMP_H, 1260/1310/88/94 0 ~ 2047 011/012 30/30/62/76/80 CLAMP_L, 186/224/130/162 0 ~ 2047 013/014 55/55/205/180/216 IMAGE_OUT_DELAY_H, 352/330/803/ 0 ~ 2047 015/016 793/743/743/ Read only 902/352/366 SYNC_OUT_DELAY_H,...
  • Page 36 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description MOTION_WEIGHT_8, 1/1/1/1/1/1/1/1 0 ~ 15 MOTION_SUM_0, 20/20/0/0/20/20/0/0 0 ~ 1023 MOTION_SUM_1, 32/32/9/9/32/32/9/9 0 ~ 1023 MOTION_SUM_2, 86/86/0/0/86/86/0/0 0 ~ 1023 MOTION_SUM_3, 0 ~ 1023 110/110/63/63/110/110/63/63 PEAK_V_LPF_SEL, 0 or 1 109 (reg 7)fix PEAK_V_CORR, 0 ~ 255...
  • Page 37 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description current 0 or 3 adr5(4-3) counter 0 or 1 adr5-2 out_clk 0 or 1 adr5-1 clk_chb 0 or 1 adr5-0 Group: 22 ICS_data ICS_R0_EnDLS 0 ~ 1 ICS_R0_EnPLS 0 ~ 1 NTSC &...
  • Page 38 Electrical Adjustments Adjustment Item Initial Value Range Input source / Description CLAMP 8˜ 0 ~ 2048 Group: 516 HDTV 575p Gakaku TOTAL DOTS 1308 0 ~ 2048 DISP DOTS 1364 0 ~ 2048 575p H BACK PORCTH 0 ~ 2048 Stored by SH2, controlled by PW V BACK PORCTH 0 ~ 2048...

  • Page 39: Chassis Over View

    ■ Chassis Block Diagrams Chassis over view B-PANEL G-PANEL R-PANEL IC5101 IC6181 BLK-DC HV-AFC Y,Cb,Cr IC031 AUDIO-AMP. IC1141 NT/PAL-SW IC001 VOLUME IC5001 AUDIO-SW DVI-I D-SUB D-SUB MONITOR OUTPUT AUDIO -39-...

  • Page 40: Inputs & Video Signal Processing Stage

    Chassis Block Diagrams Inputs & video signal processing stage IC8061 IC8071 IC8081 IC4251 IC4261 IC4271 BUFFER BUFFER BUFFER BUFFER BUFFER BUFFER IC8001 IC201 IC4201 DVI-I/F IP CONVERTER <AD9888> <SI1661> <TC240CFTB> IC3201 IC8091 BUFFER <TC74LCX541> <MB40C348> IC5191 AMP. <BA7623> IC8041 SW-BUFFER <TC74LCX541>...

  • Page 41: Lcd Panel Driving Stage

    Chassis Block Diagrams LCD panel driving stage IC3501 IC3531 IC3561 B-LEVEL SHIFT G-LEVEL SHIFT B-LEVEL SHIFT <L3E01040> <L3E01040> <L3E01040> IC401 DIGITAL GAMMA CORRECTION <L3E07050> IC9401 DIGITAL BRIGHTER <LC24085> -41-...

  • Page 42: Audio Signal Processing Circuit

    Chassis Block Diagrams Audio signal processing circuit AV BOARD AU_SW1 AU_SW2 VIDEO SP901 AUDIO-IN Q013 Q014 Q5001 SP902 AUDIO-IN Q5002 Q011 AUDIO-IN Q5062 Q031 Mute: L AUDIO MUTE Q5052 Q5051 MUTE AUDIO BOARD Q5061 K55B K20P 18 16 20 A_SW1 WRL_CPU A_SW2 READ_CPU...

  • Page 43: Motor Driving Circuit

    Chassis Block Diagrams Motor driving circuit FOCUS K55F IC5501 FOCUS DRIVE <BA6287> ZOOM IC5531 ZOOM DRIVE <BA6287> K55B IICSCL IC801 LENS SHIFT IICSDA K55G IC5561 9,10 18,20 LENS SHIFT DRIVE <BA6920> BRIGHT K55E IC6501 11,12 BRIGHT DRIVE <BA6287> MAIN BOARD AUDIO BOARD Logic Table of Drive ICs (IC5501,IC5531, IC6501) Logic Table of Drive ICs (IC5561)

  • Page 44: System Controls

    Chassis Block Diagrams System controls P-FAIL CHO_TXD_L IC1801 I/O EXPANDER <M66500> -44-...

  • Page 45: Power Supply & Protection Circuit

    Chassis Block Diagrams Power supply & protection circuit FAN_LOCK P-FAIL P-FAIL 15.5V 3.3V S-5V 15VP FAN_LOCK IC801 -45-...

  • Page 46: Troubleshooting

    ■ Troubleshooting No Power The possible causes of No Power are listed below. Please - The abnormality on the lamp ballast board was detected. check following and refer to the chapter “Power supply and The lamp ballast board outputs error signal (LAMP_DET) protection circuit”...

  • Page 47: No Picture

    Troubleshooting No Picture The possible causes of No Picture are listed below. Please 3. No picture from DVI source. check following and refer to the chapter “Inputs & video sig- Check 5V power supply(5VDVI) at pins 6 and 7 of K10R nal processing stage”, “LCD panel driving stage”...

  • Page 48: No Sound

    Troubleshooting No Sound Please check following and refer to the chapter “Audio signal 3. No audio output signal at speakers. processing circuit” in the Chassis Block Diagrams on the pre- Check audio signals at pins 13 and 8 of IC031 on the vious page.

  • Page 49: Control Port Functions

    ■ Control Port Functions ● System Control & I/O Port Table (IC801) Name Function Name Function Polarity PA23/WRHH USB RESET USB reset signal Active L PE14/TIOC4C/DACK0/AH IC RESET Power Control w/o FAN and LAMP Active L PA22/WRHL SEPA_RESET Reset output for M66230 L: Reset PA21/CASHH Not used...
  • Page 50 Control Port Functions Name Function Name Function Polarity PD16/D16/IRQ0 PW_SW Not used PD15/D15 DATA15 Data Bus 15 PD14/D14 DATA14 Data Bus 14 PD13/D13 DATA13 Data Bus 13 PD12/D12 DATA12 Data Bus 12 PD11/D11 DATA11 Data Bus 11 PD10/D10 DATA10 Data Bus 10 PD9/D9 DATA9 Data Bus 9...
  • Page 51 Control Port Functions ● Parallel I/O Expander (IC1801, M66500FP) Name Function Name Function Polarity CG_FILTER Not used (Initial: L) DT_STB 5V ±0% A SW1 Audio SW 1 (SW1,SW2) = PC1:L, L PC2:H, L PC3:L,H A SW2 Audio SW 2 IP_PWR_DN IP Power down mode switch H: Use IP L: Not use IP IPSEL_CSA...
  • Page 52 Control Port Functions ● IIC Bus I/O Expander (IC5581, M62320FP) Port Functions Pin No. Name Function Action Serial Data output port (Not connected) IIC BUS SCL IIC BUS SDA FOCUS+ FOCUS + Active H FOCUS- FOCUS - Active H ZOOM+ ZOOM + Active H ZOOM-...
  • Page 53 Control Port Functions ● IIC Bus DA Converter (IC1531, M62399FP) Port Functions Name Function Name Function Polarity Reset input IIC BUS SCL IIC BUS SDA not use REF_B B White-Black level adj. REF_G G White-Black level adj. REF_R R White-Black level adj. VrefL DAC lower reference voltage input VrefU1...

  • Page 54: Waveform

    ■ Waveform VIDEO-IN <IC1141-4> Y-IN <IC3101-5> C-IN <IC3101-7> VIDEO_Y <IC3101-21> VIDEO_CB <IC3101-22> VIDEO_CR <IC3101-23> AV_HSYNC <IC3101-9> AV_VSYNC <IC3101-4> AV_R-OUT <TP13R> AV_G-OUT <TP13G> AV_B-OUT <TP13B> HD_OUT <TPHD> VD_OUT <TPVD> GHS_PW <TPGHS> -54-...
  • Page 55 Waveform GVS_PW <TPGVS> DHS <TPDHS> DVS <TPDVS> B-S&H OUT <TP501> G-S&H OUT <TP531> R-S&H OUT <TP561> NRS-G<TP2531> NRS-B/R <TP2561> -55-...

  • Page 56: Cleaning

    ■ Cleaning After long periods of use, dust and other particles will accumulate on the LCD panel, prism, mirror, polarized glass, lens, etc., causing the picture to darken or color to blur. If this occurs, clean the inside of optical unit. Remove dust and other particles using air spray.

  • Page 57: Ic Block Diagrams

    ■ IC Block Diagrams ● AD8185ARU <Selector, IC3001> ● AD9888KS140 <A/D, IC201> -57-...
  • Page 58 IC Block Diagrams ● BA6287F <Motor Drive, IC5501, IC5531, IC6501> ● BA6920F <Motor Drive, IC5561> -58-...
  • Page 59 IC Block Diagrams ● BA7078AF <SynC. Detector, IC7201> ● BA7655 <Audio Pre-amp, IC001> -59-...
  • Page 60 IC Block Diagrams ● DB7600 <Sync. Switch, IC3021, IC3022> ● CXA2101AQ <RGB Matrix, IC4101> -60-...
  • Page 61 IC Block Diagrams ● ICS1523M <PLL, IC4231> ● L306070D <D/A-Sample & Hold, IC501, IC530, IC561> -61-...
  • Page 62 IC Block Diagrams ● M62392 <D/A, IC3291> ● M62393 <D/A, IC281, IC4881> -62-...
  • Page 63 IC Block Diagrams ● M62399 <D/A, IC1501, IC1531> ● ML60851 <USB Driver, IC9801> -63-...
  • Page 64 IC Block Diagrams ● PW365 <System Control & Scan Converter, IC301> ● TA1318AF <AFC Sync. Driver, IC6181> -64-...
  • Page 65 IC Block Diagrams ● TB1274AF <Video Decoder, IC1101> ● TC90A69F <PAL 3L-Y/C Separation, IC2101> -65-...
  • Page 66 IC Block Diagrams ● TDA1517ATW <Audio Output, IC031> -66-...

  • Page 67: Service Parts List

    ■ Electrical Parts List MD3-XT1000 Product safety should be considered when a component replacement is made in any area of a projector. Components indicated by a ! mark in this parts list and the circuit diagram show components whose value have spe- cial significance to product safety.
  • Page 68 MD3-XT1000 Electrical Parts List Note: Parts order must contain Chassis No., Part No., and Descriptions. ● OUT OF CIRCUIT BOARD RC Board FN905 Cooling Fan Sensor Ballast Board Board FN902 Cooling Fan Power DC Board Main Board Power AC Board Audio Board FN906...

  • Page 69: Main Board

    MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description 405 147 2205 TR 2SA1037AK-S-T146 ASSEMBLIED BOARDS 405 002 0308 TR 2SA1037K T146 R 405 002 0407 TR 2SA1037K T146 S 610 301 1943 ASSY,PWB,MAIN MC3A 405 002 6706 TR 2SA1179-M6-TB 610 301 1950...
  • Page 70 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description Q141 405 014 4509 TR 2SC2412K T146 R 405 015 8902 TR 2SC2812-L7-TB 405 014 4608 TR 2SC2412K T146 S 405 163 1602 TR 2SC2812N-L6-TB0 405 015 8704 TR 2SC2812-L6-TB 405 163 1701 TR 2SC2812N-L7-TB0...
  • Page 71 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description 405 014 4608 TR 2SC2412K T146 S Q3301 405 014 4509 TR 2SC2412K T146 R 405 015 8704 TR 2SC2812-L6-TB 405 014 4608 TR 2SC2412K T146 S 405 015 8902 TR 2SC2812-L7-TB 405 015 8704...
  • Page 72 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description 405 015 8902 TR 2SC2812-L7-TB 405 015 8704 TR 2SC2812-L6-TB 405 163 1602 TR 2SC2812N-L6-TB0 405 015 8902 TR 2SC2812-L7-TB 405 163 1701 TR 2SC2812N-L7-TB0 405 163 1602 TR 2SC2812N-L6-TB0 Q4891 405 014 4509...
  • Page 73 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description IC141 409 527 6807 IC NJM2575F1 IC501 409 502 3302 IC L3E06070D0A IC1501 409 428 9600 IC M62399FP IC5131 409 323 8906 IC TC4W53FU(TE12L) IC1531 409 428 9600 IC M62399FP IC5191 409 404 0805...
  • Page 74 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C1123 403 145 9905 CERAMIC 22P J C1878 403 155 1609 CERAMIC 33P J C1124 403 145 9905 CERAMIC 22P J C1879 403 155 1609 CERAMIC 33P J C1125TM 403 269 2608...
  • Page 75 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C2514 403 162 5300 ELECT 4.7U M C3116 403 304 2105 ELECT 47U M 6.3V C2516 403 164 0204 CERAMIC 0.1U Z C3117 403 164 0204 CERAMIC 0.1U Z C2517...
  • Page 76 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C3244 403 113 3805 CERAMIC 1000P K C402 403 164 0204 CERAMIC 0.1U Z C3247 403 283 6309 CERAMIC 1U Z C403 403 304 1801 ELECT 100U M 6.3V C3248...
  • Page 77 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C4178 403 215 2201 CERAMIC 0.01U K C4831 403 164 0204 CERAMIC 0.1U Z C4179 403 215 2201 CERAMIC 0.01U K C4836 403 164 0204 CERAMIC 0.1U Z C418 403 164 0204...
  • Page 78 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C572 403 164 0204 CERAMIC 0.1U Z C6371 403 164 0204 CERAMIC 0.1U Z C576 403 164 0204 CERAMIC 0.1U Z C6372 403 113 3805 CERAMIC 1000P K C577 403 149 9208...
  • Page 79 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C814 403 304 1801 ELECT 100U M 6.3V RB4801 645 021 0358 R-NETWORK 100X4 0.063W 403 373 7704 ELECT 100U M 6.3V 645 031 3325 R-NETWORK 100X4 1/16W C815 403 164 0204 CERAMIC...
  • Page 80 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R1104 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R1506 401 105 0405 MT-GLAZE 100 JA 1/16W R1105 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R1507 401 105 0405 MT-GLAZE 100 JA 1/16W R1106...
  • Page 81 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R1882 401 105 0603 MT-GLAZE 10K JA 1/16W R2576 401 148 6006 MT-GLAZE 2.2 JA 1/16W R1883 401 105 0603 MT-GLAZE 10K JA 1/16W R2577 401 148 6006 MT-GLAZE 2.2 JA 1/16W R1884...
  • Page 82 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R3151 401 105 0504 MT-GLAZE 1K JA 1/16W R3269 401 105 2003 MT-GLAZE 1.8K JA 1/16W R3152 401 105 0504 MT-GLAZE 1K JA 1/16W R327 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R3153...
  • Page 83 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R373 401 105 0603 MT-GLAZE 10K JA 1/16W R421 401 105 3901 MT-GLAZE 33 JA 1/16W R375 401 105 2607 MT-GLAZE 22 JA 1/16W R4211 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R376...
  • Page 84 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R464 401 105 3901 MT-GLAZE 33 JA 1/16W R4887 401 105 0405 MT-GLAZE 100 JA 1/16W R466 401 105 3901 MT-GLAZE 33 JA 1/16W R4891 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R467...
  • Page 85 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R5246 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R6180 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R5247 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R6181 401 105 0405 MT-GLAZE 100 JA 1/16W R5261...
  • Page 86 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R819 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R9403 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R821 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R9404 401 105 7909 MT-GLAZE 0.000 ZA 1/16W R822...
  • Page 87 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description L1161 645 021 1607 INDUCTOR,10U J D4805 407 223 0501 ZENER DIODE 02DZ12Y(TPH3) L140 401 035 4108 MT-GLAZE 0.000 ZA 1/8W D4806 407 223 0501 ZENER DIODE 02DZ12Y(TPH3) L1501 645 026 1008 INDUCTOR,3.3U M...
  • Page 88 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description 405 002 6706 TR 2SA1179-M6-TB C038 403 281 5205 CERAMIC 0.22U Z 405 002 6904 TR 2SA1179-M7-TB C041 403 343 4900 ELECT 470U M 405 163 1503 TR 2SA1179N-M6-TB C042 403 343 4900...
  • Page 89 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R5582 401 105 0405 MT-GLAZE 100 JA 1/16W Q3052 405 014 4509 TR 2SC2412K T146 R R5601 401 290 1508 MT-GLAZE 0.1 JE 1/2W 405 014 4608 TR 2SC2412K T146 S R5602 401 105 0603...
  • Page 90 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C3022 403 323 1301 CERAMIC 0.47U Z R1033 401 113 4402 MT-GLAZE 75 JA 1/16W C3023 403 323 1301 CERAMIC 0.47U Z R1036 401 113 4402 MT-GLAZE 75 JA 1/16W C3024...
  • Page 91 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R7094 401 105 7909 MT-GLAZE 0.000 ZA 1/16W D1002 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 R7096 401 105 7909 MT-GLAZE 0.000 ZA 1/16W D1003 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 R7202 401 105 0405...
  • Page 92 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description 405 147 2205 TR 2SA1037AK-S-T146 405 163 1602 TR 2SC2812N-L6-TB0 405 002 0308 TR 2SA1037K T146 R 405 163 1701 TR 2SC2812N-L7-TB0 405 002 0407 TR 2SA1037K T146 S Q5062 405 014 4509 TR 2SC2412K T146 R...
  • Page 93 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C5012 403 164 0204 CERAMIC 0.1U Z R2053 401 105 0504 MT-GLAZE 1K JA 1/16W C5013 403 304 3102 ELECT 22U M R2054 401 105 0504 MT-GLAZE 1K JA 1/16W C5051...
  • Page 94 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description R5006 401 105 7909 MT-GLAZE 0.000 ZA 1/16W D2003 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 R5007 401 105 0603 MT-GLAZE 10K JA 1/16W D2004 407 223 1102 ZENER DIODE 02DZ6.2Y(TPH3 R5008 401 105 7909...
  • Page 95 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description C6803 403 164 0204 CERAMIC 0.1U Z C6804 403 164 0204 CERAMIC 0.1U Z OWNER'S MANUAL RESISTOR (English) 610 301 9765 OWNER'S MANUAL-MC3A R6801 401 105 2904 MT-GLAZE 22K JA 1/16W (Germany)
  • Page 96 MD3-XT1000 Electrical Parts List Key No. Part No. Description Key No. Part No. Description -96-...

  • Page 97: Mechanical Parts List

    ■ Mechanical Parts List MD3-XT1000 Note: Parts order must contain Chassis No., Part No., and Descriptions. ● CABINET PARTS M1-b M1-a -97-...
  • Page 98 MD3-XT1000 Mechanical Parts List ● OPTICAL PARTS L18: For R-panel L19: For G-panel L20: For B-panel L3-a: For R-panel L3-b: For G-panel L3-c: For B-panel (Polarized Glasses) L3-d: For R-panel L3-e: For G-panel L3-f: For B-panel (Optical Flters) -98-...
  • Page 99 MD3-XT1000 Mechanical Parts List -99-...
  • Page 100 MD3-XT1000 Mechanical Parts List L1-b L1-a (Zoom) (Focus) L1-c (Mounting Base) -100-...
  • Page 101 MD3-XT1000 Mechanical Parts List L7 L21 CAUTION: Part must be placed in specified direction when replacing the optical parts. Please see “Optical Parts Disassemblies” for further instructions. -101-...
  • Page 102 PANEL FRONT FIN-MC3A 645 055 1734 LENS,RELAY(OUT) 610 293 9972 SPACER LEG-MA8A 645 055 2069 LENS,CONDENSER(IN) 645 047 8031 BADGE,SANYO*26.2X5.7L26.0 645 055 5367 LENS,PROJECTION-SM(BASE) 610 289 1812 BADGE V MARK S-MK6A 645 055 5503 LENS,CONDENSER (G) 645 055 5374 MIRROR(W-COLD)
  • Page 103 MD3-XT1000 Mechanical Parts List -103-...
  • Page 104 SANYO Electric Co., Ltd. (MD3A) Dec. 2002 BB 400 Printed in Japan...

Table of Contents