Tone Settings - Nokia 6800 User Manual

Note that the operator logo is not displayed when the phone activates the screen
saver. For more information on availability of an operator logo using SMS, MMS, or
WAP, contact your network operator or your WAP service provider.
SCREEN SAVER TIMEOUT
Digital clock screen saver is used for power saving in standby mode. It is activated
when no function of the phone has been used for a certain time while the phone's
flip is closed. Press any key to deactivate the screen saver or open the flip. The screen
saver is also deactivated when the phone is out of the network coverage area.
Press Menu, then select Settings, Display settings, and Screen saver timeout.
Select the timeout after which the screen saver will be activated. The length of the
timeout can vary from 5 seconds to 60 minutes.
Note that until you set the phone's clock, the screen saver shows the time as
00:00. Also, the screen saver overrides all the graphics and texts on the display in
standby mode.
DISPLAY BRIGHTNESS
You can change the display brightness level of the phone display.
Press Menu, then select Settings, Display settings, and Display brightness. Move
the joystick to the left to decrease and to the right to increase the brightness level,
and press OK to accept it.

Tone settings

Press Menu, then select Settings, and Tone settings. You can find the same settings
in the Profiles menu, see "Profiles (Menu 3)" on page 62. Note that the settings
you make will change the settings in the active profile.
Select Ringing options to choose how the phone notifies you of an incoming voice
call. The options are Ring, Ascending, Ring once, Beep once, and Silent.
Select Ringing tone for incoming voice calls. To select ringing tones that have been
saved in the Gallery, select Open gallery from the ringing tone list.
Select Ringing volume and Vibrating alert for incoming voice calls and incoming
messages. The vibrating alert does not work when the phone is connected to a
charger, a desktop stand, or a car kit.
Tip: If you receive a ringing tone using OTA or by downloading, you can
save the ringing tone in the Gallery.
Select Message alert tone to set the alert tone for the incoming messages, select
Keypad tones, or Warning tones to set the phone to sound tones, for example,
when the battery is running out of power.
68 Copyright © Nokia 2003