Setup and Installation Guide
2.
Touch the appropriate numbers on the keypad to enter the pass code, and press
to enter Admin mode.
Figure 5. Admin Home Page
The default pass code for Admin mode is 5678. The Admin pass code
NOTE
for your configuration may have been revised. Consult your system
administrators for the correct pass code.
3.
To exit Admin mode, press
Connecting to a WLAN Network
To set up a WLAN network:
1.
Enter Admin mode by following the steps in
2.
Touch
screen.
Figure 6. Apps Screen
(App icon) in the upper right corner of the screen to display the Apps
.
Entering Admin Mode on page
7
6.