Samsung SDP-850 Quick Start Manual page 2

A D V A N C E D
Once you've adjusted your settings for text documents and full color materials, they are
automatically stored in memory, allowing you to quickly switch between wide varieties of
subjects by pressing the
is powered off, but not if it is unplugged.
Note: All Preset functions including the Text / Image settings will be saved even if the
unit is powered down.
F E A T U R E S
The accessory LED lamp can be turned on or off by
pressing the
Tip: If viewing glossy material, slide the lamp forwards or
backwards on the upper arm to eliminate glare. The lamp
can also be used on the lower arm to achieve the desired
results.
The TXT/IMG
and Image settings. In the
Brightness buttons to set the desired lighting for your text
documents. In the
obtain the best results for full colored materials such as
photographs.
TXT / IMG button. These are stored in memory even if the unit
Use the FREEZE
while you change your subject or to Freeze an object in
To switch between a computer display and the digital
presenter, connect the computer display output to the VGA
Input connection on the back of the SDP-850. Press the
INT/EXT button to switch between the digital presenter
and the computer display.
PRESET – Up to 4 User-defined presets can be stored
allowing the presenter to quickly select up to four pre-
determined settings.
First, adjust all your settings for the desired result (zoom,
lamp, focus, etc.). Next select
remote and enter a number from 1 to 4 to save. To recall
the preset, select
press the appropriate number for your setting.
LAMP button found on the remote control.
button allows you to switch between
Text mode, adjust the
Image mode, adjust
button to "hold" any image on screen
PRESET / SAVE
PRESET / ACTIVE
Text
Brightness to
on the
on the remote and
2