Makita 1051D Instruction Manual page 14

ASSEMBLY
Dust
bag
Install the dust bag on the nozzle
of
the
tool.
When installing it, push the bag's entry port
toward the nozzle as far as it will go to prevent it from coming off during operation.
For the best results, empty the dust bag when it becomes about half full. Remove the
dust bag from the tool and pull out the fastener.
NOTE:
If you connect a Makita vacuum cleaner Model 406 to this tool, more efficient and cleaner
operations can be performed.
Removing or installing planer blades
CAUTION:
*Always be sure that the tool is switched off and the battety cartridge is removed before
*Handle the blades very carefully. Use gloves or rags to protect your fingers or hands
To remove the blades, first loosen the two installation bolts one turn counterclockwise
with the hex wrench provide.
Push the blade from the belt side with the hex wrench.
Remove the other blade in the same manner.
removing or installing the blades.
when removing
or
installing the blades.
14