Dismantling And Rinsing The Fine Foam Frother - Jura IMPRESSA C60 Instructions For Use Manual

Dismantling and rinsing
the fine foam frother
j T As soon as the receptacle containing the cleaning solution is
empty, turn the switch to the o position.
STEAM / READY
T Rinse the receptacle thoroughly, fill it with 8.5 oz (250 ml) of
fresh water and immerse the milk pipe in the water.
T Empty the other receptacle and place it under the fine foam
frother once more.
h T Turn the switch to the m position.
STEAM , the fine foam frother and the milk pipe are rinsed
with fresh water.
j T As soon as the receptacle containing the fresh water is
empty, turn the switch to the o position.
STEAM / READY
The cleaning of the fine foam frother is now complete.
To make sure the fine foam frother works properly, and in the
interests of hygiene, it must be dismantled and rinsed daily if you
have been preparing milk. Your IMPRESSA will not prompt you to
dismantle and rinse the frother.
T Remove the milk pipe and rinse it thoroughly under running
water.
T Carefully remove the fine foam frother from the Connector
System by twisting slightly.
©
T Dismantle the fine foam frother into its individual parts.
T Rinse all the parts of the fine foam frother thoroughly under
running water. If there are severely dried-on milk residues,
firstly immerse the individual parts in a solution of 8.5 oz
(250 ml) cold water and one capful of JURA milk system
cleaner. Then rinse the parts thoroughly.
T Re-assemble the fine foam frother.
E Ensure that all individual parts are correctly and firmly
connected to ensure optimum operation.
T Firmly attach the fine foam frother to the Connector
System © .
5 Maintenance
33