Rainbow Star RF-V16 User Manual

Rainbow Star RF-V16 User Manual

Advertisement

1. Microphone
2. Power button
3. Min-USB port

INITIAL SETUP

1. Unpack the box and check the contents agree with the following:
a. 1 x RF-V16 tracker unit
b. 1 x USB power supply cord
c. 1 x USB plug connector
2. Purchase a micro-SIM card from your preferred mobile network operator and credit with a
minimum of R10.00. Ensure data is loaded as well as voice minutes.
3. Activate the SIM card from a mobile phone before inserting it into the tracker unit.
4. Ensure that the tracker unit is powered off before inserting or extracting the sim card at any
time.
5. Insert the sim card into your RF-V16 tracker as follows:
6. To release the sim card, press it in again and it will spring out.
User Guide – Web based setup
4. Telephone number 1
5. GPS LED
6. SOS button
7. GSM/GPRS LED
8. Telephone number 2
RF-V16 GPS/GSM/GPRS Tracker
9. SIM card slot
10. SIM card cover
11. Speaker
12. Lanyard loop hole

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RF-V16 and is the answer not in the manual?

Questions and answers

Summary of Contents for Rainbow Star RF-V16

  • Page 1: Initial Setup

    4. Ensure that the tracker unit is powered off before inserting or extracting the sim card at any time. 5. Insert the sim card into your RF-V16 tracker as follows: 6. To release the sim card, press it in again and it will spring out.
  • Page 2: Power On/Off And Charging

    7. Connect the power supply cord to the plug connector. 8. Insert the plug connector into a standard 15amp plug circuit and let it charge overnight POWER ON/OFF and CHARGING 1. Hold down the power button for 3 seconds. 2. A magical tune is played at start-up. 3.
  • Page 3 5. Enter the tracker ID No. of your unit (e.g 1234567890) and then enter the PASSWORD which is set at 123456 on delivery. This can be changed later. 6. Once you have logged in successfully to www.gps123.org, the screen will show an information bubble providing you with details of the device name, device ID, status, position time location, stop time and position type.
  • Page 4 4. Fill in the other details if you want but these are not necessary. The overspeed limit can however be useful if you suspect that the driver of the vehicle transporting the tracker holder is a careless or reckless driver. 5.
  • Page 5 7. Specify the time in minutes as to how often you want the device to update it’s location data. For example, you might want to track your child on the way to school so set the interval at 1 minute. Once your child is at the required destination you can change the interval to say 20 minutes.

Table of Contents