Display Functions - Normal Operation - Ideal Boilers Logic+ Combi 24 User Manual

7. DISPLAy FUNCTIONS - NORMAL OPERATION MODE
The display scrolls through a maximum of 3 messages under any operational condition, as shown below.
Note. The temperatures shown below are for illustration purposes only. The measured temperatures will be shown on the boiler.
NORMAL OPERATION
Mode knob in off position and no
heat demand
Mode knob in summer (
no heat demand
Mode knob in winter (
no heat demand
Domestic hot water operation
Domestic hot water set at 64ºC or 50ºC or less
Central heating operation
Central heating set at 80ºC or 60ºC or less
Pre-heat operation
Domestic hot water set at 59ºC or 50ºC or less
Boiler frost protection
Pump overrun
Fan post-purge
Service required
MESSAGE 1
Boiler off
) position and Summer setting
) position and Winter setting
Hot water
Central heating
Pre heat setting
Boiler running freeze
protection cycle
Normal boiler operaton
Normal boiler operation
12 month service interval
request
MESSAGE 2
Timer or room stat off
Temperature 64º
Temperature 50ºC
Radiators 80ºC
Radiators 60ºC
Temperature 59ºC
Temperature 50ºC
Temperature 5ºC
Going to Standby
Going to Standby
Contact Installer
12
MESSAGE 3
High efficiency
Super efficiency
High efficiency
Super efficiency
High efficiency
Super efficiency
Super efficiency
Restart to clear