Setting Motion Sensor Sensitivity; Enabling/Disabling Voice Activated Phone Answering - Sena 20S User Manual

20S

21.7 Setting Motion Sensor Sensitivity

Voice Prompt
Factory Default
Level Adjustment
Apply
Motion Sensor Sensitivity determines the sensitivity when you double
tap on the surface of the 20S to enter voice command mode. Rotate the
Jog Dial until you hear the voice prompt, "Motion sensor sensitivity".
By tapping the Phone Button, it will lead you to level adjustment mode.
Default is at high, but you may change it to low, or disable the feature
by rotating the Jog Dial. After you have completed the setting, tap
the Phone Button to apply the changes. If this feature does not work
properly, disable this feature, and press on the Ambient Mode Button
to enter voice command mode.
46
"Motion sensor sensitivity"
High
Rotate the Jog Dial
(High/Low/Disable)
Tap the Phone Button

21.8 Enabling/Disabling Voice Activated Phone Answering

Voice Prompt
Factory Default
Enable
Disable
If this feature is enabled, you can answer incoming calls by simply
saying a word loudly enough, unless you are connected to intercom.
For example, when you hear a series of beeps for an incoming call,
you can answer the phone by saying "Hello" or any other word loudly.
However, the VOX Phone feature does not work if you are connected
to intercom. This feature is enabled from the factory but can be
Sena Smartphone App. If this mode is disabled, you have to tap the
Jog Dial or the Phone Button to answer an incoming call.
"VOX phone"
Enable
Tap the Phone Button
Tap the Jog Dial