Menu Mode; Radio Mode - Skoda Citigo Operating Instructions Manual

BAL - setting of the volume ratio between the left and the right side
■
FAD - setting of the volume ratio between the front and the rear
■

MENU mode

SCN (scan) function
Press the rotary knob or the
2 MENU
The auto-play function starts and plays each station in the current frequency
band for about five seconds.
Press the rotary knob or the SCN function key again to end the auto-play at
2
the current radio station.
Function AS
Press the button and then the AS button.
MENU
An automatic station finding is started during which the 6 stations with the
strongest signal in the memory level FM1 and/or AM1 are stored.
Setting special functions
Press the button and then the SET function key.
MENU
SKM (SEEK MODE) - automatic station finding
■
ALL - stops the station finding at all available stations
■
■ PRESET - stops the station finding only at the stored stations
VOL - reduces the volume when turning on
■
■ GALA - speed-sensitive volume adjustment
DIS - sets the display backlight
■
PHONE - outputs telephone calls via the onboard loudspeakers
■
■ PDC - sets the reduction of the volume when the park distance control is active
PDC VOL ATTENU 0 - no volume limit
■
PDC VOL ATTENU 1 - medium level volume limit
■
■ PDC VOL ATTENU 2 - low level volume limit
PDC VOL ATTENU 3 - mute
■
4
General information
button and then the SCN function key.
AUX - sets the input sensitivity of an external source
■
OFF - switches off
■
Ð
AUX VOL LEVEL 1 - high level, used in particular for notebooks
■
AUX VOL LEVEL 2 - medium level, used for cassette or CD players
■
AUX VOL LEVEL 3 - low level, used for MP3 player
■
Note
Each setting change is stored by changing to another menu point.

RADIO mode

RADIO mode
Ð
Your radio is equipped with FM and AM wavebands.
In the ranges FM1/FM2 and AM1/AM2 there are each 6 memory spaces available, in
order to change, press the button
Manual search
Tune to the desired station by turning the rotary knob
Ð
Automatic station finding
The radio searches for the next radio station in the selected waveband by press-
ing the button or briefly.
 £
Save radio station
Tune to the desired station and press and hold the function key
will be heard.
Note
Certain radio stations transmit additional text information - designated as radio
■
text. RDS (Radio Data System) used to transmit program IDs and additional serv-
ices, thus enabling automatic station tracking, for example. In the event of suffi-
ciently satisfactory reception, the suitable RDS radio stations will display the sta-
tion name instead of the station frequency.
Traffic information function TP
Press the button to switch the traffic information function on/off.
TP
briefly.
RADIO
.
2
until a beep
11
Ð
Ð
£