Toshiba CIX series User Training Reference page 7

Call Forward Any Call - Internal and Incoming Line Calls
Forwards any call, whether an internal call or incoming line call.
All Calls to an extension.
Press ext. button + #6011 (tone) + dial the dest. ext. no. (tone)
All Calls to outside telephone no. Busy to an ext.
Press ext. button + #6021 (tone) + dial the dest. ext. no. (tone) telephone
no.
Press ext. button + #6031 (tone) + dial the dest. ext. no. + timer (08~60)
(tone)
Busy No Answer to an ext.
Press ext. button + #6041 + dial the dest. ext. no. # (tone) + timer (08~60)
(tone)
Cancel Press ext. button + #6051 (tone)
DSS
This optional feature enables you to use a DSS button to connect directly to another
station's line extension. The DSS LED shows the status (idle/busy) of the station and/or
the station's primary extension. For example, a station's DSS button LED shows busy
(light steady red) when the station is:
busy on a call on any button
idle but all appearances of the station's extension are in use by other
stations.
When the station is in DND, the LED flashes red. To connect directly to another
station's extension:
When connected to a line or another station, press DSS. The original
party is put on-hold. You can call a station even if the DSS LED shows
busy (steady red).
Announce the call...or transfer the call by hanging up or pressing Release.
Note you can transfer the call to an idle or busy station.
PARK
The Call Park feature enables you to hold a call temporarily in a location other than your
telephone. These areas are called orbits. You or another telephone user can retrieve a
parked call from its orbit by specifying the orbit number. You can specify one of 20
General Park Orbits (7000~7019) or a valid extension number within the system. Once
you have parked a call in an orbit, you can:
Hang up and retrieve the parked call at a later time
Originate another call
Access a voice paging device to announce the parked call for pickup from
another station