Viewing The Model Settings Screen - Epson RUNSENSE SF-810 User Manual

Model Settings - Interval settings screen

Viewing the Model Settings screen

1
Connect the cradle to your computer with the USB cable.
2
Place the product into the cradle.
Check that the contact points on the product are pointing up and match the contact marks on the cradle.
After placing the product into the bottom of the cradle with the LCD screen facing out, push carefully on the
top of the product until it clicks into place.
c
Important:
Make sure you place the product in the cradle correctly or you may damage your product.
Using your SF-810 with a computer
When making the Interval setting, you can also customize
your sprint and recovery intervals.
62