Mercury Floor Machines L-15E Manual

175 rpm super heavy duty floor machine 1.5 hp / 15”, 17”, 19”, 20” and 21”

Advertisement

Mercury Floor Machines, Inc
New Equipment Warranty
Limited Warranty
Mercury Floor Machines, Inc. warrants new equipment against defects in material and
workmanship under normal use and service to the original purchaser. Any statutory implied
warranties, including any warranty of merchantability or fitness for a particular purpose, are
expressly limited to the duration of this written warranty. Mercury Floor Machines, Inc. will not be
liable for any other damages, including but not limited to indirect or special consequential damages
arising out of or in connection with the furnishing, performance, use or inability to use the machine.
This remedy shall be the exclusive remedy of the purchaser. The warranty period is subject to the
conditions stated below.
5 Years - Motor and Gearbox. 1 Year- Service Labor
Mercury Floor Machines Inc. warrants electric motors and transmission gearboxes on all Mercury
floor machines to be free from defects in material and workmanship, under normal use and service
for five (5) years to the original purchaser. Parts replaced or repaired under this warranty are
warrantied for the remainder of the original warranty period. Service labor charges are covered for
one (1) year from the date of purchase, when performed by a Mercury authorized-service provider.
Freight charges to and from this service providers will be covered for 90 days from the purchase
date. After this 90 day period, these freight charges will be paid by the equipment owner. Travel
expenses are not covered.
Wear Items on All Machines
Critical Wear Items - bearings, capacitors, clutches, pulleys, rectifiers, relays, switches, wheels,
tires and casters are warranted for manufacturing defects for one (1) year from the purchase date.
Normal Wear Items - belts, brushes, bumpers, carbon brushes, cords, finishes, squeegees,
actuating cables, and gaskets are warranted for manufacturing defects for ninety (90) days from
the purchase date.
All warrantees of motors and associated components will be voided; if the machine is used as a
floor sander; if the machine is serviced by anyone other than a Mercury-authorized service
provider; if the machine is mechanically modified; or if the machine is misused or abused.
The warranty starts on the purchase date by the original purchaser from an authorized Mercury
Floor Machines, Inc. distributor, subject to proof of purchase. The Machine Registration Card must
be completed and returned immediately at the time of purchase. If proof of purchase cannot be
identified, the warranty start date is 90 days after the date of sale to an authorized Mercury Floor
Machines, Inc. Distributor.
110 South Van Brunt Street
Englewood, NJ 07631
Phone (201) 568-4606
Toll Free (888) 568-4606
FAX (201) 568-7962
www.mercuryfloormachines.com
©2009 Mercury Floor Machines, Inc.
®
ISSA
MEMBER
The Experts
on Cleaning and Maintenance
MEMBER
SINCE 1958
MERCURY LoBoy
175 RPM Super Heavy Duty Floor Machine
1.5 HP / 15", 17", 19", 20" and 21"

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the L-15E and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mercury Floor Machines L-15E

  • Page 1 Mercury Floor Machines, Inc. will not be liable for any other damages, including but not limited to indirect or special consequential damages arising out of or in connection with the furnishing, performance, use or inability to use the machine.
  • Page 2: Safe Operating Conditions

    5.2 Scrubbing Brush Filaments 1.0 Safe Operating Conditions READ THIS MANUAL BEFORE USING THIS FLOOR MACHINE. Scrubbing brushes are available with a range of bristle types - - from the KNOW THE PROPER OPERATION, CORRECT APPLICATIONS softest for the highest gloss floors, to the most aggressive for the heaviest AND THE LIMITATIONS OF THIS EQUIPMENT BEFORE USE.
  • Page 3 5.0 Brush Construction 1.1 Electric Power This floor machine operates on a 15 amp nominal 115V, Your new floor machine provides reliable, efficient, safe power to your 60 HZ, A.C. power circuit. (Motors may be custom wired scrubbing brush. To get the best results, you need to use at the factory for 220 V, 50 Hz international operation.) a brush of the best design and construction.
  • Page 4: Troubleshooting

    3.2 Transport 2.0 Mount the Handle This floor machine is shipped from the factory with the handle To transport this floor machine from the janitor’s closet to the work area: unattached. You will need two 7/16” wrenches to complete the Lock the handle in the “up”...
  • Page 5: Operating Tips

    3.0 Operating Tips 2.1 Attach the Power Cord The triple-wire grounded power cord has been For indoor use only. factory-installed into the handle tube. Plug the male Sweep abrasive soils before scrubbing. connector (9) coming out of the motor housing into While the brush or pad driver is spinning, keep the floor the female connector (10) coming out of the end of machine moving to avoid “donut”...
  • Page 6 ITEM DESCRIPTION PART # #REQUIRED LO-BOY Switch Box Back A-104 Handle Tube Screw B-23 Switch Box Closing Screw B-21 Super Heavy-Duty Floor Machine Strain Relief Clip M-213 175 RPM - 1 HP or 1.5 HP Ground Wire Screw B-68 Rubber Spacer M-218 Y 15”, 17”, 19”, 20”...

This manual is also suitable for:

L-17eL-19eL-20e21"

Table of Contents