Table of Contents
Advertisement
Jump Starting
■
Jump Starting Procedure
Turn off the power to electric devices, such as audio and lights. Turn off the engine,
then open the hood.
Booster
Battery
1. Connect the first jumper cable to your
vehicle's battery + terminal.
2. Connect the other end of the first jumper
cable to the booster battery + terminal.
u
Use a 12-volt booster battery only.
u
When using an automotive battery
charger to boost your 12-volt battery,
select a lower charging voltage than 15-
volt. Check the charger manual for the
proper setting.
3. Connect the second jumper cable to the
booster battery - terminal.
4. Connect the other end of the second
jumper cable to the grounding point as
shown. Do not connect this jumper cable to
any other part.
5. If your vehicle is connected to another
vehicle, start the assisting vehicle's engine
and increase its rpm slightly.
6. Attempt to start your vehicle's engine. If it
turns over slowly, check that the jumper
cables have good metal-to-metal contact.
1Jump Starting
WARNING
3
A battery can explode if you do not follow
the correct procedure, seriously injuring
anyone nearby.
Keep all sparks, open flames, and smoking
materials away from the battery.
Securely attach the jumper cables clips so that they
do not come off when the engine vibrates. Also be
careful not to tangle the jumper cables or allow the
cable ends to touch each other while attaching or
detaching the jumper cables.
Battery performance degrades in cold conditions and
may prevent the engine from starting.
Continued
523
- Quick Links:
- Gauges and Displays
- Maximum Load Limit
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the 2016 Odyssey and is the answer not in the manual?
Questions and answers
Our battery died and was jumped. Now our ac doesn’t turn on at all
After the battery was jumped, the AC may not be turning on because the vehicle's electrical system needs to reset. Additionally, battery performance degrades in cold conditions, which may affect system functions. If the battery was recently dead or disconnected, the vehicle may need time to restore all functions properly. Checking fuses and ensuring the battery is fully charged can help resolve the issue.
This answer is automatically generated
After they put in a new senser for the tire pressure, the gauge changed. It now shows current trip mileage instead of total mileage do I change it back?
To change the mileage display back to total mileage (odometer) on a 2016 Honda Odyssey, press the SEL/RESET button until the odometer appears on the multi-information display.
This answer is automatically generated