DRILL D 10VF D 10VG • MODEL D 13VF D 13VG • HANDLING INSTRUCTIONS D13VF NOTE: Before using this Electric Power Tool, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this power tool.
Carrying power tools with your finger on the switch or GENERAL POWER TOOL SAFETY WARNINGS energising power tools that have the switch on invites accidents. WARNING d) Remove any adjusting key or wrench before turning the Read all safety warnings and all instructions. power tool on.
Cutting accessory contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock. SPECIFICATIONS Model D10VF D10VG D13VF D13VG Voltage (by areas)* (110V, 115V, 120V, 127V, 220V, 230V, 240V)
Ring PRIOR TO OPERATION Sleeve 1. Power source Ensure that the power source to be utilized conforms to the power requirements specified on the product Loosen nameplate. 2. Power switch Ensure that the power switch is in the OFF position. If the plug is connected to a receptacle while the power switch is in the ON position, the power tool Tighten...
Page 5
CAUTION: If the chuck cannot be removed by striking the wrench, don’t strike the wrench forcibly and send the drill to a HITACHI AUTHORIZED SERVICE CENTER. Handle (2) Attaching the angle unit. Joint After removing the chuck, engage the coupling to the drill spindle.
To attach the hook, it is necessary to disassemble the handle portion which covered the tool’s electrical system. For your continued safety and electrical shock protection, installing the hook on this drill should ONLY be performed by a HITACHI High Speed AUTHORIZED SERVICE CENTER. Hook (A) Fig.
4. Inspecting the carbon brushes For your continued safety and electrical shock protection, carbon brush inspection and replacement on this tool should ONLY be performed by a HITACHI AUTHORIZED SERVICE CENTER. 5. Service parts list CAUTION Repair, modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center.
Page 12
Hitachi Koki Co., Ltd. Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan Code No. C99104313 F Printed in China...