Samsung SND-6084R User Manual
  1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Security Camera
  5. SND-6084R
  6. User manual

Samsung SND-6084R User Manual

Hide thumbs Also See for SND-6084R:
Table of Contents

Advertisement

Quick Links

See also: User Manual
NETWORK CAMERA
SND-6084R/
User Manual
SNO-6084R/SNV-6084R

Advertisement

Table of Contents
loading

Related Manuals for Samsung SND-6084R

Summary of Contents for Samsung SND-6084R

  • Page 1 NETWORK CAMERA SND-6084R/ User Manual SNO-6084R/SNV-6084R...

  • Page 2: Network Camera

    Disclaimer Samsung Techwin makes the best to verify the integrity and correctness of the contents in this document, but no formal guarantee shall be provided. Use of this document and the subsequent results shall be entirely on the user’s own responsibility.

  • Page 3: Important Safety Instructions

    overview important Safety inStructionS 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings, Install in accordance with the manufacturer’s instructions.

  • Page 4: Explanation Of Graphical Symbols

    overview warninG TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH THE VENTILATION GRILLS OR OTHER OPENNINGS ON THE EQUIPMENT. Apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
  • Page 5 class construction An apparatus with CLASS construction shall be connected to a MAINS socket outlet with a protective earthing connection. Battery Batteries(battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. Disconnection Device Disconnect the main plug from the apparatus, if it’s defected.
  • Page 6 overview Please read the following recommended safety precautions carefully. y Do not place this apparatus on an uneven surface. y Do not install on a surface where it is exposed to direct sunlight, near heating equipment or heavy cold area. y Do not place this apparatus near conductive material.

  • Page 7: Table Of Contents

    Important Safety Instructions Product Features Recommended PC Specifications Recommended Micro SD/ SDHC/SDXC Memory Card Specifications What’s Included At a Glance (SND-6084R) At a Glance (SNO-6084R) At a Glance (SNV-6084R) iNSTALLATioN & Installation (SND-6084R) CoNNeCTioN Installation (SNO-6084R) Installation (SNV-6084R) Inserting/Removing a Micro SD...

  • Page 8: Web Viewer

    overview web vieweR Connecting to the Camera Login Installing Silverlight Runtime Installing STW WebViewer Plugin Using the Live Screen Playing the recorded video SeTup SCReeN Setup Video & Audio Setup Network Setup Event Setup System Setup AppeNDix Specification Product Overview Troubleshooting Open Source Announcement 8_ overview...

  • Page 9: Product Features

    The dustproof and waterproof design makes you feel at ease when installing the product outdoors or exposing it to rain. • SSnr3 (Samsung Super noise reduction) The high-performance DSP chip effectively removes the GAIN noise of low light level and shows a clear and sharp image even in dark places.
  • Page 10 overview • alarm If an event occurs, the event-related video will be transferred to the FTP/email specified by the user or saved to the Micro SD memory, or the event signal will be sent to the Alarm Out port. • Built-in SD memory (Sno-6084r) This product is equipped with an internal 4GB memory card (SDHC).

  • Page 11: Recommended Pc Specifications

    recommenDeD pc SpecificationS • CPU : Intel Core 2 Duo 2.4 GHz or higher (for using 1920x1080 30 fps) Intel Core i7 2.8 GHz or higher (for using 1920x1080 60 fps) Web Plug-in is optimized to SSE 4.1 Instruction Set. •...

  • Page 12: Recommended Micro Sd

    (It is applicable only to the SNO-6084R model.) wHat’S incLuDeD Please check if your camera and accessories are all included in the product package. Appearance Item Name Quantity Description Model Name SND-6084R or Camera SNO-6084R or SNV-6084R Instruction book, SND-6084R/ Installer S/W CD, SNO-6084R/...
  • Page 13 Appearance Item Name Quantity Description Model Name SND-6084R/ Quick Guide SNO-6084R/ (Optional) SNV-6084R SND-6084R/ Warranty card SNO-6084R/ (Optional) SNV-6084R Used to test the camera SND-6084R/ Cable for the testing connection to a portable display SNO-6084R/ monitor device SNV-6084R SND-6084R/ Power Terminal Block...
  • Page 14 Used for assembling the dome case when installing the product Machine Screws SNV-6084R on the pipe, wall mount, etc. or blocking a hole. Options (not included) Housing for installing indoor SND-6084R/ Indoor Buried Housing buried type cameras SNV-6084R 14_ overview...

  • Page 15: At A Glance (Snd-6084R)

    GLance (SnD-6084r) appearance Item Description Dome cover Case cover used to protect the lens and the main unit. Camera Case Housing part that covers the camera body. English _15...
  • Page 16 overview components b cd k l m 16_ overview...
  • Page 17 Item Description Internal Cover It is a cover to protect the main body. Illumination Sensor Detects incoming light to control the IR LED. Lens Lens for the camera. IR LED These infrared LED’s are controlled by the illumination sensor. Zoom in (Tele) Zoom out (Wide) Zoom/Focus Control Focusing on a near object (Near)
  • Page 18 overview Item Description Micro SD Memory Compartment for the Micro SD memory card. Card Compartment Audio Out Jack Used to connect to speakers. Audio In Jack Used to connect to a microphone. Network Port Used to connect the PoE or Ethernet cable for network connection. Microphone hole A microphone is embedded.

  • Page 19: At A Glance (Sno-6084R)

    at a GLance (Sno-6084r) appearance Item Description Sunshield It protects the camera from the direct sunlight. Sunshield Hold It fixes the sunshield with the camera. The button restores all camera settings to the factory default. Press and hold for about 5 seconds to reboot the system. If you reset the camera, the network settings will be adjusted so that Reset Button DHCP can be enabled.
  • Page 20 overview Item Description Zoom in (Tele) Zoom out (Wide) Zoom/Focus Control Focusing on a near object (Near) Button Focusing on a far object (Far) Focus Control Press this button for automatic focus control. Output port for test monitoring the video output. Use the test monitor cable Test Monitor Out to connect to a mobile display and check the test video.
  • Page 21 components CAUTION: Be ware of the Rated Voltage and Polarity of the power connection. ARM-IN ARM-OUT Item Description Power Port Used to plug the power cable. Used to connect the alarm input sensor or external day/ ARM-IN night sensor. Alarm I/O Port Common port for alarm output signal.
  • Page 22 overview Item Description Audio Out Jack Used to connect to speakers. Audio In Jack Used to connect to a microphone. IR LED These infrared LED’s are controlled by the illumination sensor. Illumination Sensor Detects incoming light to control the IR LED. 22_ overview...

  • Page 23: At A Glance (Snv-6084R)

    at a GLance (Snv-6084r) appearance Item Description Dome cover Case cover used to protect the lens and the main unit. Camera Case Housing part that covers the camera body. English _23...
  • Page 24 overview components 24_ overview...
  • Page 25 Item Description Internal Cover It is a cover to protect the main body. Illumination Sensor Detects incoming light to control the IR LED. Lens Lens for the camera. IR LED These infrared LED’s are controlled by the illumination sensor. Power Port Port for power terminal block.

  • Page 26: Installation & Connection

    • Stuck-in or peeled-off cables can cause damage to the product or a fire. • For safety purposes, keep anyone else away from the installation site. And put aside personal belongings from the site, just in case. inStaLLation (SnD-6084r) Disassembling 1. Use one hand to hold the camera’s bottom part and turn the cover counterclockwise with another hand to separate it.
  • Page 27 installation 1. Attach the installation template to the selected area and punch 3 holes as shown in the figure. 2. Use the 2 supplied screws to fix the camera to the 2 punched holes. Set the <FRONT TOP> mark imprinted on the camera to face the direction of camera monitoring.

  • Page 28: Installation (Sno-6084R)

    installation & connection inStaLLation (Sno-6084r) This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. installation 1.

  • Page 29: Installation (Snv-6084R)

    inStaLLation (Snv-6084r) This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the external cable is not. You are recommended to install this product below the edge of eaves to prevent the cable from being externally exposed. Disassembling 1.
  • Page 30 installation & connection installation 1. Drill a hole (diameter : 6mm, depth : min 55mm) of the case bottom and insert the provided plastic anchor to the end. 2. Fit the bottom hole to the anchor hole and insert and fix the taping screw (M4.5xL50). 3.
  • Page 31 connecting waterproof power cable and Lan cable if the Lan cable is not connected indoors 1. Remove the dome cover and the case. 2. Pull out the long projected part of the rubber plug on the bottom and remove it as shown in the figure. 3.
  • Page 32 installation & connection 5. Insert the LAN cable into the large hole made by removing the projected part of the rubber plug in step 2 above. 6. Remove the sheath with a cable cutter, and align the cables. 7. Connect the LAN cable with a LAN connector, and insert it into the LAN tool.
  • Page 33 connecting alarm cable 1. Remove the dome cover and the case. 2. Pull out the rubber plug on the bottom as shown in the figure. 3. Insert the alarm cable into the hole made by removing the rubber plug in step 2, and connect the cable with the PCB alarm terminal.
  • Page 34 installation & connection attaching to the unbundled adapter Choose and purchase a necessary one of the following options (unbundled) that is suitable to the installation site or for your convenience. 1. Remove the dome cover from the case by referring to the “Disassembling”...

  • Page 35: Optional Accessories For Installation

    SBP-301HM3 : SNV-6084R) This adaptor is used when installing the dome camera onto a wall. 2. CEILING MOUNT ADAPTOR(SBP-300CM)/ HANGING MOUNT(SBP-301HM2 : SND-6084R, SBP-301HM3 : SNV-6084R) This adaptor is used when installing the dome camera on a concrete ceiling. English _35...
  • Page 36 installation & connection 3. POLE MOUNT ADAPTOR(SBP-300PM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on a pole whose diameter is bigger than 80mm. 4. CORNER MOUNT ADAPTOR (SBP-300KM) This is an adaptor for WALL MOUNT ADAPTOR (SBP-300WM or SBP-300WM1) installation on the corner of wall joint.

  • Page 37: Adjusting The Monitoring Direction

    2. Set the horizontal angle so that the image is not reversed. In case of the SND-6084R model, rotate the lens with the cover on the rear of the lens unit. 3. Adjust the tilt angle so that the camera faces toward the monitoring object.

  • Page 38: Inserting/Removing A Micro Sd

    & connection inSertinG/removinG a micro SD memory carD (SnD-6084r/Snv-6084r) Disconnect the power cable from the camera before inserting the Micro SD memory card. Do not insert the Micro SD memory card while it’s upside down by force. Otherwise, it may damage the Micro SD memory card.

  • Page 39: Removing A Micro Sd Memory Card

    Gently press down on the exposed end of the memory card as shown in the diagram to eject the memory card from the slot. <SND-6084R> <SNV-6084R> Pressing too hard on the Micro SD memory card can cause the card to shoot out uncontrollably from the slot when released.

  • Page 40: Memory Card Information

    installation & connection memory carD information (not incLuDeD) what is a memory card? The memory card is an external data storage device that has been developed to offer an entirely new way to record and share video, audio, and text data using digital devices. Selecting a memory card that’s suitable for you Your camera supports Micro SD/SDHC/SDXC memory cards.

  • Page 41: Connecting With Other Device

    Device Monitor to install Ethernet Power <SND-6084R> Power CAUTION: Be ware of the Rated Voltage and Polarity of the power connection. ARM-IN ARM-OUT Ethernet Monitor to install <SNO-6084R> English _41...
  • Page 42 installation & connection Monitor to install Ethernet Power <SNV-6084R> The CVBS out terminal of the product is provided for easier installation, and is not recommended for monitoring purposes. 42_ installation & connection...

  • Page 43: Ethernet Connection

    Connect the Ethernet cable to the local network or to the Internet. power Supply (SnD-6084r) Use the screwdriver to connect each line (+, –) of the power cable to the corresponding power port of the camera. If both PoE and DC 12V are applied simultaneously, the product will be supplied with power from PoE.

  • Page 44: Power Cable Specification For Each Model

    & connection power cable Specification for each model in case of Dc 12v input: Wire Type (AWG) SND-6084R Cable Length (Max.) SNO-6084R SNV-6084R in case of ac 24v input: Wire Type (AWG) SNO-6084R Cable Length (Max.) SNV-6084R network cable Specification...

  • Page 45: Connecting To Audio Input/Output

    connecting to audio input/output Speaker Microphone Network Speaker Amp Microphone Microphone CAUTION: Be ware of the Rated Voltage and Polarity of the power connection. ARM-IN Speaker ARM-OUT Microphone Microphone Speaker Speaker English _45...
  • Page 46 As a microphone is built in, you can use the built-in microphone instead of an external one. (It is applicable only to the SND-6084R model.) 2. Connect the AUDIO OUT port of the camera with the speaker or LINE IN port of the amplifier that the speaker is connected to.
  • Page 47 Connect the Alarm I/O cable to the corresponding port of the port box. Sensor Alarm (Warning lamp) <SND-6084R> CAUTION: Be ware of the Rated Voltage and Polarity of the power connection. ARM-IN ARM-OUT Sensor...
  • Page 48 installation & connection Sensor Alarm (Warning lamp) <SNV-6084R> • ALARM-IN : Used to connect the alarm input sensor or external day/night sensor. • ALARM-OUT : Used to connect the alarm output signal. • GND : Common port for alarm output signal If devices (e.g., flashing light and siren) that exceed the voltage and current specifications are connected by using the open collector method, it may cause malfunction.
  • Page 49 to connect the external sensor Connect one strand of each signal line (2-strand) of the sensors to the [aLarm in] port, and connect the other strand to the [GnD] port. alarm in wiring Diagram External Inside of the camera VCC_3.3V connection RESISTOR RESISTOR...

  • Page 50: Network Connection And Setup

    network connection and setup You can set up the network settings according to your network configurations. connectinG tHe camera DirectLy to LocaL area networKinG connecting to the camera from a local pc in the Lan 1. Launch an Internet browser on the local PC. 2.

  • Page 51: Connecting The Camera Directly

    connectinG tHe camera DirectLy to a DHcp BaSeD DSL/caBLe moDem INTERNET DSL/Cable Modem Camera External Remote PC DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 52: Modem

    network connection and setup connectinG tHe camera DirectLy to a pppoe moDem INTERNET PPPoE Modem Camera External Remote PC DDNS Server (Data Center, KOREA) 1. Connect the user PC directly with the network camera. 2. Run the IP Installer and change the IP address of the camera so that you can use the web browser on your desktop to connect to the Internet.

  • Page 53: Connecting The Camera To A Broadband Router With The

    connectinG tHe camera to a BroaDBanD router witH tHe pppoe/caBLe moDem This is for a small network environment such as homes, SOHO and ordinary shops. Camera INTERNET PPPoE or PPPoE or Broadband Cable Modem Cable Modem Camera Router External Remote PC DDNS Server (Data Center, KOREA) Local PC...

  • Page 54: Buttons Used In Ip Installer

    network connection and setup ButtonS uSeD in ip inStaLLer e f g Item Description Model name of the connected camera. Device Name Click the column to sort the list by model name. However, search will be stopped if clicked during the search. Alias This function is not currently implemented.

  • Page 55: Static Ip Setup

    Exits the IP Installer program. For the IP installer, use only the installer version provided in the installation CD or use the latest one if available. You can download the latest version from the Samsung web site (www.samsungcctv.com). Static ip Setup manual network Setup Run <ip installer_v2.XX.exe>...
  • Page 56 network connection and setup 3. In the <address> pane, provide the necessary information. • MAC (Ethernet) Address : The MAC address imprinted on the camera label is automatically displayed and requires no user setting. IP related parameters can be set only when DHCP is not checked.
  • Page 57 if using a Broadband router • IP Address : Enter an address falling in the IP range provided by the Broadband Router. ex) 192.168.1.2~254, 192.168.0.2~254, 192.168.XXX.2~254 • Subnet Mask : The <Subnet mask> of the Broadband Router will be the <Subnet mask>...

  • Page 58: Auto Network Setup

    network connection and setup auto network Setup Run <ip installer_v2.XX.exe> to display the camera search list. At the initial startup, both [auto Set] and [manual Set] will be grayed out. For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not support this function.

  • Page 59: Dynamic Ip Setup

    Dynamic ip Setup Dynamic ip environment Setup • Example of the Dynamic IP environment - If a Broadband Router, with cameras connected, is assigned an IP address by the DHCP server - If connecting the camera directly to modem using the DHCP protocols - If IPs are assigned by the internal DHCP server via the LAN checking the Dynamic ip 1.

  • Page 60: Port Range Forward (Port Mapping

    network connection and setup port ranGe forwarD (port mappinG) Setup If you have installed a Broadband Router with a camera connected, you must set the port range forwarding on the Broadband Router so that a remote PC can access the camera in it. manual port range forwarding 1.
  • Page 61 Port forwarding can be done without additional router setup if the router supports the UPnP (Universal Plug and Play) function. After connecting the network camera, set <Quick connect> of <Samsung DDNS> to <On> in the “Setup  Network  DDNS” menu.

  • Page 62: Connecting To The Camera From A Shared Local Pc

    network connection and setup connectinG to tHe camera from a SHareD LocaL pc 1. Run the IP Installer. It will scan for connected cameras and display them as a list. 2. Double-click a camera to access. The Internet browser starts and connects to the camera.

  • Page 63: Connecting To The Camera

    web viewer connectinG to tHe camera normally, you would 1. Launch the Internet browser. 2. Type the IP address of the camera in the address bar. ex) • IP address (IPv4) : 192.168.1.100  http://192.168.1.100 - the Login dialog should appear. •...

  • Page 64: Web Viewer Connection Via Upnp/Bonjour

    To register your device to the <DDnS> server, visit www.samsungipolis.com and register your device first, and then set the Web Viewer’s <network> - <DDnS> to <Samsung DDnS>, as well as providing <product iD> that had been used for DDNS registration.
  • Page 65 LoGin Whenever you access the camera, the login window appears. Enter the User ID and password to access the camera. 1. Enter “admin” in the <user name> input box. The administrator ID, “admin”, is fixed and can not be changed. 2.

  • Page 66: Installing Silverlight Runtime

    web viewer inStaLLinG SiLverLiGHt runtime If your PC has not installed Silverlight Runtime or has just installed an old runtime version, you will be redirected to the Silverlight Runtime installation page automatically when accessing the web viewer. to install on windows oS 1.
  • Page 67 5. When done, click <close>. to install on mac oS 1. Run the file trailing with “.dmg”. 2. Run the install package file automatically created, ending with “.pkg”. 3. Click <continue>. English _67...
  • Page 68 web viewer 4. Select your language on the language selection screen, and click <continue>. 5. Click <agree>. 6. Click <install>. 68_ web viewer...
  • Page 69 7. Enter the password of the account currently logged in, and click <install Software> and continue. 8. Once completed, click <close>. English _69...

  • Page 70: Installing Stw Webviewer Plugin

    web viewer inStaLLinG Stw webviewer pLuGin If connecting to a camera for the first time, you will see the installation message. Then, install the required WebViewer Plugin to access the camera and control the video from it in real time. 1.
  • Page 71 5. Click [oK]. The old version of Web Viewer Plug-in is deleted. 6. Click [install] to begin installation of the Web Viewer Plug-in. 7. Click [finish]. STW Web Viewer Plug-in installation is completed. English _71...

  • Page 72: Using The Live Screen

    web viewer uSinG tHe Live Screen Item Description Monitoring Move to the monitoring screen. Playback Switch to the monitoring screen that plays recording data in the Micro SD memory. Setup Move to the Setup screen. Displays the Live video on the screen. Viewer Screen You can use the mouse wheel to activate the digital zooming in Viewer screen.

  • Page 73: To Capture The Snapshot

    Item Description Full Screen Switch the current video to the maximum size of the monitor. Capture Saves the snapshot as an image file in the .bmp or .jpg format. Enable Audio and Microphone are control the Audio volume. Audio/Microphone Control Only the Audio volume can be controlled.
  • Page 74 web viewer to fit the full screen 1. Click the [full Screen ( )] button. 2. This will fit the Viewer to the full screen. 3. To exit the full screen mode, press [esc] on the keyboard. For the Internet Explorer and Google Chrome browser, you can switch to the full screen. to use audio 1.
  • Page 75 pLayinG tHe recorDeD viDeo Before you can play the video, you must configure the record settings. For details on record settings, refer to “Storage”. (page 108) name of event search screen and its function Item Description Set the search date and time from the data saved in the Micro SD memory Search range setting card.

  • Page 76: To Play The Content After Searching By Event

    web viewer to play the content after searching by event 1. Click the [playback ( )] button. 2. Specify the start time and end time of your search. 3. Select an event type for your search within the specified period. 4.
  • Page 77 name of time search screen and its function Item Description Time bar The section in the specific period is played by moving the time bar. Set the search date using the calendar. Search date setting Dates for which there is video in the Micro SD memory card are displayed within the boxes on the calendar.

  • Page 78: To Play After Searching By Time

    web viewer to play after searching by time 1. Click [time Search ( 2. Click a desired date in the calendar. The video on the specified date will be played. 3. If the video playback is stopped, select a time and click [play ( The video on the selected time will be played.
  • Page 79 to back up the searched video 1. During playback, click [ ] on the scene to back up. The scheduling window for backup start and end time appears. 2. Click [ ] button. The Save As window appears. 3. Confirm the save path and click [Save] button.
  • Page 80 web viewer to play an avi file The AVI file does not contain the recording time data. 1. Separate the micro SD memory card from the camera. Before separating the micro SD memory card, set the <Device> to <Off> in the “Setup  Event ...

  • Page 81: Video Profile

    setup screen Setup You can configure the video & audio, network, event and system settings of the camera in the network. 1. In the Live screen, click [ Setup ( ) ] . 2. The Setup screen appears. Microsoft Silverlight 5.0 or higher is required to be installed on the PC for setup pages that provide preview video.
  • Page 82 setup screen • E-mail/FTP profile : Video profile to be transferred to the specified email or FTP site. Only the MJPEG codec can be set as the E-mail/FTP profile. • Record profile : This is the profile that is applied to video recording. •...

  • Page 83: To Add/Change The Video Profile

    to add/change the video profile The profile setup can be added or modified to accommodate various profiles depending on the recording conditions. 1. Select one from the <video profile> options. 2. Provide the name and select a codec. 3. Specify the conditions under which the codec will be applied. 4.
  • Page 84 setup screen • Encoding priority : You can set the video transfer method to Framerate or Compression. • GOV length : It specifies the distance (in terms of number of frames) between two consecutive I-Frames in a video sequence when H.264 codec was selected. (One I-Frame + 0~Several P-Frames) •...
  • Page 85 to use crop encoding 1. Select <use>. 2. Click <Set area>. The Crop Encoding Area Setup window will pop up. 3. Select <ratio>. • Ratio: It sets up the aspect ratio of the user specified area. - 16:9 : The aspect ratio shall be set to 16:9 as close as to the user specified area.

  • Page 86: Video Setup

    setup screen video setup 1. From the Setup menu, select the <video & audio ( )> tab. 2. Click <video setup>. 3. Select a <video source> mode. • Flip mode : Turn upside down the image that is captured by the camera.

  • Page 87: Audio Setup

    - Internal microphone : Microphone that is built-in in the camera. (It is applicable only to the SND-6084R model.) - External microphone : 3.5mm jack type, powered active external microphone. • Apply power to Ext. Mic. : If the external microphone connected has no separate power supply, check this option to set camera to supply power to the connected external microphone.

  • Page 88: Camera Setup

    setup screen camera setup You can change the camera settings according to the environment where the camera is located. 1. From the Setup menu, select the <video & audio ( )> tab. 2. Click <camera setup>. 3. Configure the settings as necessary of : Sensor, SSDR, White balance, Back light, Exposure, Day/Night, Special, OSD, IR 4.
  • Page 89 Set SSDr (Samsung Super Dynamic range) In a scene where the difference between bright and dark is severe, you can increase the brightness of the dark area alone to regulate the overall brightness. 1. Select <SSDr>. 2. Set <mode> to <on>.
  • Page 90 setup screen to Set BLc You can specify a desired area on the video manually and set the area to be displayed more clearly. 1. Select <Back light>. 2. Set <mode> to <BLc>. 3. Set <BLc level>. You can change the level to adjust the brightness of the monitoring area.
  • Page 91 to Set exposure You can adjust the exposure level of the camera. 1. Select <exposure>. 2. Select each item and set it properly. • Brightness : Adjust the screen brightness. • Minimum shutter : The limit of the longest exposure time. Shutter is the mode to set up the range of the sensor exposure time which will specify the upper and lower limits for the electronic...
  • Page 92 setup screen to Set Day/night 1. Select <Day/night>. 2. Select each item and set it properly. • Mode: Mode is used to adjust the color of Color or Black and White. - Color : The video is always output in color.
  • Page 93 to Setup Special 1. Select <Special>. 2. Select each item and set it properly. • Sharpness Mode : Adjust the overall sharpness of the image. If selecting <on>, you can adjust the sharpness of the image. • Sharpness level : The higher the level is, the sharper and clearer the outline of the image becomes.
  • Page 94 setup screen to Set oSD 1. Select <oSD>. 2. Select each item and set it properly. • Title overlay : It specifies if the camera name shall be displayed on the screen. • Camera title : It specifies the name of the camera to be displayed on the screen.

  • Page 95: Focus Setup

    focus setup You can adjust the focus and zoom ratio of video image. 1. From the Setup menu, select the <video & audio ( )> tab. 2. Click <focus setup> . 3. Set the focus and zoom. • Focus : Manually adjusts the lens focus (Far ...

  • Page 96: Network Setup

    setup screen networK Setup interface 1. From the Setup menu, select the <network ( )> tab. 2. Click <interface>. 3. Set the <interface> and <ipv6 setup> as necessary. • IP type : Select an IP connection type. - Manual : Specify the IP address, Subnet mask, Gateway, DNS1, and DNS2.
  • Page 97 Setting the HTTP port for Safari and Google Chrome browsers to 65535 is not allowed by security policy. • Device port : Set a port used to transfer video signals with the Samsung protocols. • RTSP port : Used to transfer videos in the RTSP mode; the default is 554.
  • Page 98 • Samsung DDNS : Select this if you use the DDNS server provided by Samsung Techwin. - Product ID : Enter the product ID that is registered with the Samsung DDNS service. - Quick connect : It sets port forwarding automatically when used with a UPnP (Universal Plug and Play) supporting router.

  • Page 99: Registering With Ddns

    DDnS to register your product with the Samsung DDnS 1. Visit the iPOLiS web site (www.samsungipolis.com) and sign in with a registered account. 2. From the top menu bar, select <DDnS Service> - <my DDnS>. 3. Click [proDuct reGiStration].
  • Page 100 Samsung DDnS in camera setup 1. From the DDNS setup page, set <DDnS> to <Samsung DDnS>. 2. Provide the <product iD> that you registered product ID with the DDNS site. 3. Click [apply (...
  • Page 101 ip filtering You can create a list of IPs that you want to grant or deny access to them. 1. From the Setup menu, select the <network ( )> tab. 2. Click <ip filtering>. 3. Select <filtering type>. • Deny : If selecting this, access from those IPs that are added to the filtering will be restricted.
  • Page 102 setup screen You can select a secure connection system or install the public certificate for this purpose. 1. From the Setup menu, select the <network ( )> tab. 2. Click <SSL>. 3. Select a secure connection system. To access the camera using HTTPS mode, you have to type the IP address for the camera in the form of “https://<Camera_IP>”.
  • Page 103 802.1x When connecting network, you can choose whether using 802.1x protocol, and then install the certification. 1. From the Setup menu, select the <network ( )> tab. 2. Click <802.1x>. 3. Set the <ieee 802.1x setting(eapoL using eap-tLS)>. • Enable IEEE 802.1x : Specify the use of the 802.1x protocol.
  • Page 104 setup screen You can specify the priority to secure a stable transfer rate for a specific IP. 1. From the Setup menu, select the <network ( )> tab. 2. Click <QoS>. 3. Click the [add ( )] button. The IP list will be created. 4.
  • Page 105 • Enable SNMP Trap : SNMP trap is used to send important events and conditions to the Admin. - Community : Enter the trap community name to receive messages. - IP address : Enter the IP address to which messages will be sent. - Authentication failure : It specifies whether an event shall be generated when the community information is invalid.
  • Page 106 Disable for UPnP Discovery. • Friendly name : Display the camera name. Friendly name is displayed in the format of SAMSUNG-<Model Name>-<MAC Address>. In the Windows operating system which basically supports UPnP, the cameras connected to the network are displayed.

  • Page 107: Event Setup

    event Setup ftp / e-mail You can configure the FTP/E-mail server settings so that you can transfer the images taken with camera to your PC if an event occurs. 1. From the Setup menu, select the <event ( )> tab. 2.
  • Page 108 setup screen • E-mail configuration - Server address : Enter the IP address of the email server that you transfer the alarm or event images to. - Use authentication : Select whether to use authorization. - Use SSL : Specify the use of SSL. - ID : Enter the user ID for logging into the email server.
  • Page 109 • Record file type : It specifies the file format of the recorded images. - STW : It is Samsung Techwin’s unique file format. - AVI : It is the conventional avi format.

  • Page 110: Alarm Input

    setup screen alarm input You can set the alarm input type, activation time, and operation mode. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <alarm input> from <event action setup>. 4. Set whether or not to <enable>. 5.

  • Page 111: Time Schedule

    7. Specify an operation that will perform if an alarm occurs. • FTP : Specify the use of FTP transfer in the alarm input setup. • E-mail : Specify the use of email transfer in the alarm input setup. • Record : Specify the use of recording in the alarm input setup. •...

  • Page 112: Tampering Detection

    setup screen tampering detection You can set to detect tampering attempts and trigger events, such as sudden change of camera’s framing direction, blocked lens and other overall change of scenes from the video. 1. From the Setup menu, select the <event ( )>...

  • Page 113: Motion Detection / Video Analytics

    motion detection / video analytics Events of motion detection and video analysis can be set to trigger event signal output. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <motion detection / video analytics>...
  • Page 114 setup screen Motion detection and Video analytics cannot be used simultaneously. Before using, set the minimum and maximum motion sizes to suit desired motion range to be detected. Detected size of an object may have difference with the actual size according to its shape. Up to 16 objects from the top side of the screen can be displayed.

  • Page 115: To Use Motion Detection

    to use motion detection It detects a motion that meets all conditions specified by sensitivity, size and area. 1. Select a motion detection mode. 2. Select <Sensitivity> tab to set the sensitivity level. You can set the sensor’s sensitivity to detect a motion out of the background from the monitoring video.
  • Page 116 setup screen 4. Select <area> tab. You can specify an area on the screen to include or exclude the area to/from detection. You can specify up to 4 areas. • Detection area : Sets the entire screen as excluded from detection, and adds specified area as motion detection area.
  • Page 117 to use video analytics It detects event that meets all conditions specified by sensitivity, size and area and the event condition rules. 1. Select the video analysis mode. 2. Set <Sensitivity>, <Size> and <area>. For further details on settings, refer to “to use motion detection”.
  • Page 118 setup screen to set the video analysis rules ` passing 1. Set the type to <passing, entering/ exiting>. 2. Set the event rule to <virtual line based rules>. 3. On the screen, click on preferred starting and ending point of the virtual line, then a popup window appears.
  • Page 119 ` appearing (Disappearing) 1. Set the analysis type to <appearing (Disappearing)>. 2. Select the desired event rule: • Defined area based rules : It detects event of appearing object that appears in the area and remaining for a certain time period while not passing through the area borders, and opposite case of disappearing of objects existed in the area.

  • Page 120: Face Detection

    setup screen face detection You can set to detect recognized face and trigger an event accordingly. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <face detection> from < event action setup>. 4.

  • Page 121: Audio Detection

    audio detection You can set to detect sound over the specified level and trigger an event accordingly. 1. From the Setup menu, select the <event ( )> tab. 2. Click <event setup>. 3. Select <audio detection> from <event action setup>. 4.
  • Page 122 setup screen alarm output setup 1. From the Setup menu, select the <event ( )> tab. 2. Click <alarm output setup>. 3. Set the camera’s type of alarm output. If you change the alarm output type, the alarm out button on the monitoring page and alarm output type displayed on Event Setup page will be changed accordingly.

  • Page 123: System Setup

    SyStem Setup product information 1. From the Setup menu, select the <System ( )> tab. 2. Click <product information>. 3. Check the camera information, or provide details according to your network environment. • Model : Model name of the product. •...

  • Page 124: Date & Time

    setup screen Date & time 1. From the Setup menu, select the <System ( )> tab. 2. Click <Date & time>. 3. Specify the time and date that will be applied to the camera. • Current system time : Displays the current time settings of your system.
  • Page 125 user 1. From the Setup menu, select the <System ( )> tab. 2. Click <user>. 3. Provide the necessary user information. • Administrator password change : Change the password for the administrator. The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.
  • Page 126 setup screen upgrade / reboot 1. From the Setup menu, select the <System ( )> tab. 2. Click <upgrade / reboot>. 3. Select a desired item and set it appropriately. • Upgrade : Performs upgrading the system. • Factory default : Resets the system to the factory default.
  • Page 127 If you forcibly terminate the upgrade process, upgrade will not be completed properly. During restarting the system, accessing with web viewer will not be made. You can download the latest version from the Samsung web site (www.samsungcctv.com). to back up the current settings 1.
  • Page 128 setup screen You can check the system log or event log. 1. From the Setup menu, select the <System ( )> tab. 2. Click <Log>. 3. Select a log type. • System : You can check the system logs where any system changes are recorded including the time information.
  • Page 129 profile access You can check the profile information. 1. From the Setup menu, select the <System ( )> tab. 2. Click <profile access>. • Profile access : Show the information of the newly added profile. - Profile : Show the information of the newly added codec.
  • Page 130 Specification Description Items SND-6084R SNO-6084R SNV-6084R Imaging Device 1/2.8” PS Exmor 2.38M CMOS (IMX136) Total Pixels 1952(H) x 1116(V) Effective Pixels 1944(H) x 1104(V) Scanning System Progressive Video Min. Illumination Color : 0.1 Lux (F1.2, 50IRE), B/W : 0 Lux (IR LED on)
  • Page 131 Auto (ICR) / Color / B/W / External / Schedule Backlight Off / BLC Compensation Wide Dynamic Range 100dB Contrast Enhancement SSDR (Samsung Super Dynamic Range) (Off / On) Digital Noise SSNRIII (2D+3D Noise Filter) (Off / On) Reduction Defog...
  • Page 132 Description Items SND-6084R SNO-6084R SNV-6084R y File upload via FTP, E-Mail y Notification via E-Mail, TCP Operational Alarm events y local storage(SD/SDHC/SDXC) recording at Network disconnected y External output Ethernet RJ-45 (10/100BASE-T) Video Compression H.264(MPEG-4 Part 10/AVC), Motion JPEG...
  • Page 133 Description Items SND-6084R SNO-6084R SNV-6084R IPv4, IPv6 TCP/IP, UDP/IP, RTP(UDP), RTP(TCP), RTSP, NTP, HTTP, HTTPS, SSL, Protocol DHCP, PPPoE, FTP, SMTP, ICMP, IGMP, SNMPv1/v2c/v3(MIB-2), ARP, DNS, DDNS, QoS, PIM-SM, UPnP, Bonjour HTTPS(SSL) Login Authentication Digest Login Authentication Security IP Address Filtering User access Log 802.1x Authentication...
  • Page 134 Description Items SND-6084R SNO-6084R SNV-6084R AC24V : -50°C ~ +55°C AC24V : -40°C ~ +55°C (-58°F ~ +131°F) / Less (-40°F ~ +131°F) / Less -10°C ~ +55°C than 90% RH than 90% RH Operating Temperature (+14°F ~ +131°F) / DC12V, PoE (IEEE 802.3af) :...

  • Page 135: Product Overview

    SnD-6084r Unit : mm (inch) Ø 132.1 (5.2") Ø 97 (3.82") English _135...
  • Page 136 appendix Sno-6084r Unit : mm (inch) 333.2 (13.12") 200 (7.87") 178 (7.01") 134.6 (5.30") 321.6 (12.31") Ø 82 (3.23") (BoDy) 3- Ø 5.5 HoLeS Ø 70 (2.76") 82.2 90.4 (3.56") 136_ appendix...
  • Page 137 Snv-6084r Unit : mm (inch) Ø 160 (6.3") Ø 100 (3.94") English _137...

  • Page 138: Troubleshooting

    appendix trouBLeSHootinG PROBLEM SOLUTION y Check to make sure that the camera’s Network settings are appropriate. y Check to make sure that all network cables have been connected properly. I can’t access the camera from a y If connected using DHCP, verify that the camera is able to acquire web browser.
  • Page 139 PROBLEM SOLUTION y Verify the settings in the following sequence: <Motion detection / Video analytics> of <Event setup> is set A. Check <Data & Time> settings. to <Enable>, but no notification B. The <Motion detection / Video analytics> should be set to <Enable>. e-mail reaches me even when an C.

  • Page 140: Open Source Announcement

    Corresponding Source code from us for a period of three years after our last shipment of this product by sending email to help.cctv@samsung.com If you want to obtain the complete Corresponding Source code in the physical medium such as CD-ROM, the cost of physically performing source distribution might be charged.
  • Page 141 4. You may not copy, modify, sublicense, or distribute the c) If the modified program normally reads commands interactively when run,you must cause it, when started Program except as expressly provided under this License. running for such interactive use in the most ordinary Any attempt otherwise to copy, modify, sublicense or way, to print or display an announcement including distribute the Program is void, and will automatically...
  • Page 142 9. The Free Software Foundation may publish revised and/ This program is distributed in the hope that it will be or new versions of the General Public License from time useful, but WITHOUT ANY WARRANTY ; without even the to time. Such new versions will be similar in spirit to implied warranty of MERCHANTABILITY or FITNESS FOR the present version, but may differ in detail to address A PARTICULAR PURPOSE.
  • Page 143 To protect your rights, we need to prevent others from that (1) displays an appropriate copyright notice, and (2) denying you these rights or asking you to surrender tells the user that there is no warranty for the work (except the rights.
  • Page 144 3. protecting users’ Legal rights from anti-circumvention a) Convey the object code in, or embodied in, a physical Law. product (including a physical distribution medium), accompanied by the Corresponding Source fixed on a No covered work shall be deemed part of an effective durable physical medium customarily used for software technological measure under any applicable law fulfilling interchange.
  • Page 145 or specifically for use in, a User Product, and the conveying If a license document contains a further restriction but occurs as part of a transaction in which the right of permits relicensing or conveying under this License, possession and use of the User Product is transferred to the you may add to a covered work material governed by recipient in perpetuity or for a fixed term (regardless of how the terms of that license document, provided that the...
  • Page 146 11. patents. 12. no Surrender of others’ freedom. A “contributor” is a copyright holder who authorizes use If conditions are imposed on you (whether by court order, under this License of the Program or a work on which the agreement or otherwise) that contradict the conditions of Program is based.
  • Page 147 A FAILURE OF THE PROGRAM TO OPERATE WITH ANY Finally, software patents pose a constant threat to the OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER existence of any free program. We wish to make sure that PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF a company cannot effectively restrict the users of a free SUCH DAMAGES.
  • Page 148 The “Library”, below, refers to any such software library Thus, it is not the intent of this section to claim rights or or work which has been distributed under these terms. A contest your rights to work written entirely by you; rather, “work based on the Library”...
  • Page 149 6. As an exception to the Sections above, you may also a) Accompany the combined library with a copy of the same combine or link a “work that uses the Library” with the work based on the Library, uncombined with any other Library to produce a work containing portions of the library facilities.
  • Page 150 enD of termS anD conDitionS 12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted How to Apply These Terms to Your New Libraries If you interfaces, the original copyright holder who places develop a new library, and you want it to be of the greatest the Library under this License may add an explicit possible use to the public, we recommend making it free...
  • Page 151 6. Redistributions of any form whatsoever must retain THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ‘‘AS the following acknowledgment: “This product includes IS AND ANY EXPRESS OR IMPLIED WARRANTIES, software developed by the OpenSSL Project for use in the INCLUDING, BUT NOT LIMITED TO, THE IMPLIED OpenSSL Toolkit (http://www.openssl.org/)”...
  • Page 152 4. Neither the name of the University nor of the Department and SNMP v3 using both IPv4 and IPv6. For more additional information, send email to help.cctv@samsung.com. may be used to endorse or promote products derived from this software without specific prior written Copyright (C) 2004, Kneschke, incremental permission.
  • Page 153 PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THE COPYRIGHT OWNER OR CONTRIBUTORS BE HOLDERS AND CONTRIBUTORS "AS IS" AND ANY LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 154 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 155 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT THIS SOFTWARE IS PROVIDED BY APPLE AND ITS HOLDERS AND CONTRIBUTORS “AS IS” AND ANY CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF IMPLIED WARRANTIES OF MERCHANTABILITY AND MERCHANTABILITY AND FITNESS FOR A PARTICULAR...
  • Page 156 the mit License Some software components of this product incorporate source code covered under the MIT license as follows mit License 2.0 - Acewidget, bettermeans, jquery-ui, libxml, libxml2, Mesa3D-MesaLib,mwEmbed,OpenGL Samples Pack, Wide Studio, xorg-server, dropbear-2012.55 Copyright (c) 2011, The Dojo Foundation Copyright 2010, AUTHORS.txt (http://jqueryui.com/about) Dual licensed under the MIT or GPL Version 2 licenses.
  • Page 157 the independent JpeG Group’s JpeG Software The software included in this product contains copyrighted software that is licensed under the JPEG license. • JPEG license - Code project – Generating Outline OpenGL, Libjpeg This distribution contains the sixth public release of the Permission is NOT granted for the use of any IJG author’s Independent JPEG Group’s free JPEG software.
  • Page 158 License Since we, at Samsung Techwin, used the Mozilla Firefox component without modifying the source code according to the MOZILLA Public license 1.1, we are not obliged to provide the source code of the corresponding component. • Version 1.1 1.
  • Page 159 (d) Notwithstanding Section 2.2(b) above, no patent license is Contributor represents that, except as disclosed pursuant to granted: 1) for any code that Contributor has deleted from Section 3.4(a) above, Contributor believes that Contributor’s the Contributor Version; 2) separate from the Contributor Modifications are Contributor’s original creation(s) and/or Version;...

  • Page 160: Limitation Of Liability

    5. application of this License. upon in writing by the parties or the litigation claim is not withdrawn, the rights granted by Participant to You under This License applies to code to which the Initial Developer has Sections 2.1 and/or 2.2 automatically terminate at the attached the notice in Exhibit A and to related Covered Code.
  • Page 161 Nations Convention on Contracts for the International Sale of Goods is expressly excluded. Any law or regulation which provides that the language of a contract shall be construed against the drafter shall not apply to this License. 12. reSponSiBiLity for cLaimS. As between Initial Developer and the Contributors, each party is responsible for claims and damages arising, directly or indirectly, out of its utilization of rights under this License and You agree to...
  • Page 162 t-Kernel License - This Product uses the Source Code of T-Kernel under T-License granted by the T-Engine Forum(www.t-engine.org) t-License [License agreement for Source code of t-Kernel] established by T-Engine Forum on January 23, 2004 revised on June 17, 2004 revised on December 21, 2006 revised on March 24, 2009 article 1.
  • Page 163 article 4. License of Source code 4. The Distributor of Modification shall determine the name of the Modified Source Code subject to the rules separately 1. As provided for in this Article, T-Engine Forum shall established by T-Engine Forum and publish an appropriate notice as required by the rules on the Patch for Modification provide, and grant a license to use, the Source Code free and the Modified Source Code.
  • Page 164 article 11. Governing Law and Language T-Kernel. Provided, however, that the Ported Source Code may be treated in the same way as the Modified Source 1. This License Agreement shall be governed by and Code until the time of registration hereunder. interpreted under the laws of Japan.
  • Page 165 Samsung Techwin cares for the environment at all product manufacturing stages, and is taking measures to provide customers with more environmentally friendly products.
  • Page 166 SAMSUNG TECHWIN AMERICA Inc. SAMSUNG TECHWIN EUROPE LTD. 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 Samsung House, 1000 Hillswood Drive, Hillswood Business Toll Free : +1-877-213-1222 Direct : +1-201-325-6920 Park Chertsey, Surrey, UNITED KINGDOM KT16 OPS Fax : +1-201-373-0124 TEL : +44-1932-45-5300 FAX : +44-1932-45-5325 www.samsungcctvusa.com...

This manual is also suitable for:

Sno-6084rSnv-6084r

Table of Contents