Table of Contents
Advertisement
Monitoring.the.Back-End.Server
Filtering
Collected logs are filtered according to the conditions
set in the Log Filtering section, and only the filtered
logs are displayed on the Log list.
Setting the filtering conditions
Set the filtering conditions following the procedures
below.
1.. Select.the.Event.Type.from.the.dropdown.
list.
2.. Select.the.Event.Category/ID.from.the.
dropdown.list.
3.. Set.the.Start.Date.from.the.dropdown.list,.
and.check.the.check.box.
If the Start Date is not to be used for filtering,
uncheck the check box.
4.. Set.the.End.Date.from.the.dropdown.list,.
and.check.the.check.box.
If the End Date is not to be used for filtering,
uncheck the check box.
5.. Set.the.Start.Time.from.the.dropdown.list,.
and.check.the.check.box.
If the Start Time is not to be used for filtering,
uncheck the check box.
6.. Set.the.End.Time.from.the.dropdown.list,.
and.check.the.check.box.
If the End Time is not to be used for filtering,
uncheck the check box.
Updating.the.Log.list.automatically
Check the Auto Update check box, and the Log list will
be updated automatically.
Updating.the.Log.list.manually
Click on [Update]. The Log list is updated.
Deleting.the.log
1.. Click.on.[Delete].
The confirmation dialog box appears.
2.. Click.on.[Yes].
All log data on the Log list are deleted.
Cancel.deleting
Click on [No] on the confirmation dialog box.
Output.the.log
1.. Click.on.[Output].
2. Select a folder in which to store the log file
then enter the log file name.
3.. Click.on.[OK].
The log file is created in the specified folder.
1
Advertisement
Table of Contents
