Cupholders; Bennington Performance - Bennington Pontoon Owner's Manual

Table Top Cupholder
Make certain the pedestal post is secure and in place before using the table. It is recommended that
you store the table during transportation to prevent the table from blowing off of the boat. (Note
warning label)
Make certain the pedestal post is secure and in place before using the table. It is recommended that
you store the table during transportation to prevent the table from blowing boat.
The cooler is stored inside of the table unit. Lift the table lid to gain access to the cooler. This table is
an option for most Bennington boats. Contact your dealer for additional information.

Cupholders:

Cupholders are found in various places throughout your Bennington. Illustrated below are examples
of cupholders and their locations. Quantity and location of cupholders will vary depending on the
model.
Please note that cupholders located inside of furniture do not have a drain hose for water drainage.
Do not allow water to accumulate inside of cupholders during freezing weather. Freezing water can
crack cupholders.
Pontoon Performance:
At Bennington Pontoons, we are committed to delivering the highest possible quality pontoon boat
and engine packages in the marine industry. With this in mind, it is imperative that the correct model
of engine and propeller be installed on your boat in order for you to achieve your desired perfor-
mance. Please read the following and contact your dealer for additional performance information.
Please note, some performance items listed are not available on some Bennington models.
Table Top
Cupholder
Table Pedestal Post
(Note warning label)
Table Floor Base
Cupholder at Driver's Helm
Cupholders located at the drivers helm have a drain hose connected
to the bottom of the cup to allow water to drain out of the
cupholder to the bottom of the deck. This helps to keep water off
of wiring inside of the console. Only cupholders located at the
drivers helm have this feature. Do not remove these cupholders.
Portable Cupholder
This cupholder can be relocated on the boat to your desired
location. It slips between the sofa bench bottom and backrest
cushion as shown. This cupholder is standard on select
Bennington models. If your Bennington does not come standard
with this type of cupholder, it can be purchased through your
Bennington Marine dealer.

BENNINGTON PERFORMANCE

Bennington Owner's Manual 35