1. Pull up on the hood release
handle. It is located inside the
vehicle to the left of the
steering column.
2. Go to the front of the vehicle
and with hand palm side down,
slide the secondary hood
release handle toward the
driver side of the vehicle.
3. Lift the hood and pull the prop
rod by the sleeve from the
retainer, located above the
radiator.
4. Securely place the hood prop
into the slot on the underside of
the hood.
Vehicle Care
To close the hood:
1. Before closing the hood, be
sure all the filler caps are on
properly. Then, lift the hood to
relieve pressure on the hood
prop. Remove the hood prop
by the sleeve from the retainer
slot on the underside of the
hood and return the prop to its
retainer located above the
radiator. The prop rod must
click into place when returning
it to the retainer to prevent
hood damage.
2. Lower the hood 20 cm (8 in)
above the vehicle and release
it so it fully latches. Check to
make sure the hood is closed
and repeat the process if
necessary.
229
Need help?
Do you have a question about the Verano 2016 and is the answer not in the manual?
Questions and answers
Manual trunk release not electric?
The 2016 Buick Verano has an emergency trunk release handle inside the trunk, which is a manual release. However, the presence of a remote keyless entry (RKE) transmitter suggests that the primary trunk release may be electric.
This answer is automatically generated
Where is the block heater cord on 2016 Buick verano 2.4
The block heater cord on a 2016 Buick Verano is located on the front of the engine, on the driver side of the vehicle.
This answer is automatically generated
Page 364 in the 2016 Buick enclave