Table of Contents
Advertisement
Windows 2008 R2 environment
When connecting the LAN cable to the network interface connector, the
drivers bundled in the Windows 2008 R2 cannot be used.
When CN7841-Y or CN7841-R LAN card is added, be sure to apply the
driver in the "Drivers & Utility for Windows" CD. If the driver is
preinstalled as a factory expanded model, it is not necessary to install.
Procedure for installing the driver for Windows 2008 R2
When using this LAN card, install the network driver for the Windows 2008 R2.
It explains an automatic installation method by a driver. The procedure of
shown below is Windows 2008 R2.
1. Log in with the user name having the administration authority (such as
Administrator).
2. Click Hardware of Control Panel and then click Device Manager of
Devices and Printers. In the Device Manager window, double-click
Ethernet Controller under Other devices.
3.
The Update Driver Software window opens. Click Browse my
computer for driver software.
On the Update Driver Software window, insert the "Drivers & Utility
for Windows" CD into the DVD-ROM drive and enter the directory shown
below. Then click Next.
Table 5-1
Windows 2008 R2
5-2
PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual
OS
D:\WinSrv2008R2\Drivers\NIC\BROADXG_03\x64\setup.exe
Installing a driver
Hitachi Compute Rack Series
LAN driver storage location
Advertisement
Table of Contents
