Replacing Nylon Line - Stihl FSA 65 Instruction Manual

English

Replacing Nylon Line

STIHL AutoCut C 4-2
Always check the mowing head for signs
of wear before replacing the nylon line.
WARNING
If there are signs of serious wear,
replace the complete mowing head.
Preparations
Switch off the trimmer.
N
Move the retaining latch to ?.
N
Remove the battery
N
Put the power tool on the ground
N
with the mowing head facing up.
Removing the mowing head and
remaining nylon line
In normal operation, the supply of nylon
line in the head is used up almost
completely.
20
Hold the mowing head steady and
N
rotate the cap (1) counterclockwise
until it can be removed.
Remove the mowing head.
N
Pull the spool (2) out of the mowing
N
head (3) and remove the remaining
line.
Assembling the mowing head
1
2
3
Fit the empty spool in the mowing
N
head (3).
If the spring (4) has popped out:
Push the spring into the spool (2) as
N
far as stop.
4
2
3
FSA 65, FSA 85