Page 1
OPERATING AND MAINTENANCE MANUAL “SILVER LINE” VACUUM CLEANERS WD151S-WD301S-WD602S WD902P-WD603S Made For: Spitwater Australia Pty Ltd 953 Metry St North Albury ,NSW, Australia FAILURE TO FOLLOW OPERATING, SAFETY AND MAINTENANCE WARNING: INSTRUCTIONS LISTED IN THIS MANUAL RELEASES THE MANUFACTURER FROM ANY RESPONSIBILITY FOR ACCIDENTS OR DAMAGES TO BOTH...
SPITWATER “SILVER LINE” VACUUM CLEANERS should only be used in the manner and purpose for which they were intended and in accordance with the recommendation detailed in this Manual, and in any other Government Standard applicable in your country.
Page 4
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE ELECTRICITY SUPPLY AND EARTHING INSTRUCTIONS The SPITWATER range of VACUUM cleaners should always be connected to an appropriately earthed power outlet with voltage and current supply matching the ones listed on the data plate affixed on the unit.
Page 5
INSTALLATION AND OPERATING INSTRUCTIONS INSTALLATION 1. Identify your unit from the data plate on it and check against the technical data if it’s for DRY use only or for WET/DRY use. 2. Assemble the suction hose to the stainless steel extension tubes and a suitable pickup accessory. 3.
Page 6
MAINTENANCE INSTRUCTIONS To maintain your unit in peak working condition during its operable life it is necessary to carry out regular maintenance operations and replace worn or broken down parts immediately upon their failure. We suggest that a qualified service person carries out all maintenance and that original replacement parts be used in effecting repairs to guarantee quality, reliability and longevity.
Need help?
Do you have a question about the WD151S and is the answer not in the manual?
Questions and answers