Traxxas On-Board Audio - Traxxas 68086-21 Owner's Manual

TRAXXAS ON-BOARD AUDIO

as you drive. The sound changes with vehicle speed and throttle input.
You can hear the engine start up, revving, and even hear gears shifting
in the transmission when you speed up or slow down!
Turning on the Sound Control Module
1. Plug the blue connector from the sound
control module into the blue connector
of the sound output modules attached
to the underside of the body.
2. Turn on the model.
3. The sound control module's LED will
glow green.
4. Adjust the volume by pressing
the volume plus (+) or volume
minus (-) button.
Note: Press and hold the volume
minus (-) button for 3 seconds to set
the volume to the lowest setting.
5. Reinstall the body.
Driving Your Model with Sound
1. Start with the red rocker
1
switch in Park.
2. Tap the throttle to hear the
engine start.
3. Pull the throttle to hear the
engine rev. 3
4. Move the switch to drive,
pull the throttle, and leave
your friends in the dust!
Note: After 10 seconds with no throttle, you'll hear the sound of the
engine shut down and the sound control module will automatically stop
playing sound. Tap the throttle again to reactivate the sound control
module and hear the engine start back up.
Your Slash Short-Course Race Calibrating the Sound Control Module
Truck features the On-Board If the sounds from the control module do not
Audio System that will play match your throttle input, then follow these steps
realistic race engine sounds to recalibrate it.
1. Turn on the transmitter (with the throttle at
neutral).
2. Press and hold the sound control module power
button for 5 seconds to program neutral for the
sound control module.
3. When the LED blinks green 4 times,
programming is complete.
2
4
1
2
Press and Hold
3
Four Green Blinks
SLASH 4x4 • 19