NextBase Ride BikeCam Instruction Manual

High definition bike dvr with gps

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Instruction Manual

Table of Contents

Need help?

Do you have a question about the Ride BikeCam and is the answer not in the manual?

Questions and answers

Summary of Contents for NextBase Ride BikeCam

Page 1 Instruction Manual...
Page 3: Introduction To Using Your Bikecam
INTRODUCTION TO USING YOUR BIKECAM The Nextbase range of cameras have been designed speciﬁcally with ease of use in mind, it is recommended NOT to change the default settings, which have been carefully selected to give the best performance for day to day use.
Page 4: Table Of Contents
TABLE OF CONTENTS INTRODUCTION TO USING YOUR BIKECAM ..............TABLE OF CONTENTS ....................PRECAUTIONS ......................CAUTIONS ON USING THIS PRODUCT ..............PRODUCT SPECIFICATION ..................PACKAGE CONTENTS ....................PRODUCT FEATURES ....................PARTS & CONTROLS ....................INSTALLATION ......................VIDEO MODE ........................ PHOTO MODE ......................
Page 5: Precautions
PRECAUTIONS Please read this manual carefully before operation and keep it for future reference. It will be helpful should you encounter any operational problem. CAUTION: To reduce the risk of electric shock, do not perform any servicing other than that contained in the instruction manual unless you are qualified to do so.
Page 6: Product Specification
PRODUCT SPECIFICATION Model Number / Name NBDVR-RIDE / NEXTBASE RIDE BIKECAM Power Requirements 5V / 1.5A Power Supply 12-24Vdc power cable: Fuse Type: 20mm / 2A Output: 5Vdc Hard-wire cable: Fuse Type: 20mm / 2A Output: 5Vdc Sensor Resolution 14M Pixel (14,000,000 Pixel) Wide Angle Lens (front) - 6G / 110°...
Page 7: Package Contents
BikeCam can result. Product appearance may differ slightly to that shown above. PRODUCT FEATURES Thank you for purchasing this NEXTBASE product, in this section we will outline some of the key features that are available with this device. Wi-Fi Connectivity Connect the BikeCam to your smartphone, allowing you to control the basic functions of your BikeCam and for viewing recordings on your smartphone or tablet.
Page 8: Parts & Controls
PARTS & CONTROLS RESET 1. BikeCam screen 2. BikeCam controls Mode / Power Mode: Press to change between video, photo or playback modes. Power: Press and hold for 2 seconds to turn on and off the BikeCam. Record / OK Record: Press to start or stop a recording when in video mode, or take a photo when in photo mode.
Page 9 PARTS & CONTROLS (CONTD.) RESET 3. LED indicators Blue = charging / Red = power on / Red flashing = recording 4. End cap Remove to gain access to the MicroSD slot, Micro USB 2.0 socket and RESET button. 5. Base plate Used to secure the BikeCam to the supplied Bar Mount, see page 15 for details.
Page 10: Installation
INSTALLATION Please read the information contained within this manual to ensure the installation of the BikeCam is carried out correctly and safely. 1. Insert memory card Remove the end cap from the rear of the BikeCam and insert a MicroSD card (8-32Gb Class10). Take care to ensure that the MicroSD card is the correct way round (gold contacts facing down).
Page 11 INSTALLATION (CONTD.) 2. Power the BikeCam The BikeCam is supplied with two types of power cable, a standard 12Vdc power cable (cigarette plug) and a 12Vdc hard-wire cable. Both convert 12Vdc down to the required 5Vdc to operate your BikeCam correctly. Choose the preferred power cable to best suit your needs.
Page 12 INSTALLATION (CONTD.) Hard-wire power cable: For use when a 12-24Vdc outlet is not available, or when a permanent installation is required. 1. Waterproof connector for BikeCam Before connecting the power cable to the BikeCam, pull back the adaptor threaded housing to expose the Mini-USB connector and locating lug.
Page 13 INSTALLATION (CONTD.) Hard-wire power cable installation: These instructions provide the necessary information to install the hard-wire cable properly and safely. Before beginning the installation process, please read these instructions carefully. The hard-wire cable has been supplied with ring terminals to allow quick and easy connection directly to the motorbikes battery.
Page 14 - Failure to use the supplied installation parts and/or hardware will void the product warranty. - Failure to connect the product as instructed, may result in discharge of the vehicle battery. Should you experience any difﬁculties during installation please do not hesitate to contact our technical support team: support@nextbase.co.uk...
Page 15 INSTALLATION (CONTD.) Mounting The BikeCam is supplied with a bar mount, this is designed to allow the quick and easy installation of the BikeCam without the need for any tools or technical knowledge. The BikeCam also has a threaded insert (1/4" UNC type) in the base plate, this can be used to mount the BikeCam with a variety of camera or professional RAM mounts that are readily available.
Page 16 INSTALLATION (CONTD.) ® Advanced RAM mounting system: When using the BikeCam with a motorbike, it is recommended to use a professional RAM mounting system. The system is readily available to buy online, simply enter the given part numbers into your search engine.
Page 17 INSTALLATION (CONTD.) 5. Using the BikeCam Please see below for a guide to the basic operation of your BikeCam. Recording Indicator (flashing) Record On / Off Menu Battery Power On / Off button Press and hold for 2 seconds to turn the BikeCam on and off. Record / OK Button Press to start or stop a recording.
Page 18: Video Mode
VIDEO MODE The information given below explains the various items that are displayed on the screen when your BikeCam is in Video mode, some items will only be displayed once the relevant function has been selected within the Video menu, as described below. 200MS 1.
Page 19 Turn On / Off the Speed Stamp shown on recorded files. Default Setting: On 7. NEXTBASE Stamp Turn On / Off the NEXTBASE Stamp shown on recorded files. Default Setting: On 8. Video Length Select duration of recording length for the individual video files, the BikeCam will fill the SD Card then loop back to the beginning, overwriting the oldest files (unless protected).
Page 20 VIDEO MODE (CONTD.) Video settings menu continued. 10. GPS Stamp Turn On / Off both the GPS co-ordinates and speed stamp that are shown on recorded files. When a recording is viewed using the Driving Recorder Player the GPS co-ordinates, speed information and map location remain available.
Page 21: Photo Mode
PHOTO MODE The information given below explains the various items that are displayed on the screen when your BikeCam is in Photo mode, some items will only be displayed once the relevant function has been selected within the Photo menu, as described below. AUTO 1.
Page 22 PHOTO MODE (CONTD.) Photo settings menu The Photo settings menu is accessed by pressing the MENU button whilst in Photo mode. Use the UP and DOWN buttons to highlight setting and press the OK button to enter the options screen. Select the required option and press OK to confirm, press MENU again to return to photo mode.
Page 23: Playback Mode
PLAYBACK MODE The information given below explains the various items that are displayed on the screen when your BikeCam is in Playback mode. Video Playback 15_0530_180233_006 1080P 30/05/15 18:02 / II MODE: :PREV :NEXT 1. Video: indicates the BikeCam is displaying a video. 2.
Page 24 PLAYBACK MODE (CONTD.) The information given below explains the various items that are displayed on the screen when your BikeCam is in Playback mode. Photo Playback 15_0530_180233_006 3264 x 2448 30/05/15 18:02 1. Photo: indicates the BikeCam is displaying a photo. 2.
Page 25: General Settings Menu
GENERAL SETTINGS MENU The General settings menu is accessed by pressing the MENU button twice. Use the UP and DOWN buttons to highlight setting and press the OK button to enter the options screen. Select the required option and press OK to confirm, press MENU again to return to the original starting mode.
Page 26 GENERAL SETTINGS MENU (CONTD.) Continued from previous page. 10. Default Settings Reset the device to the default settings. 11. Auto Power Off Adjust the timing of the Auto Power Off function, this can be used to continue recording in event of loss of power within in the vehicle. Default Setting: 10 Seconds The default settings have been carefully selected to allow you to use the BikeCam without the need to change any settings.
Page 27: Finalcam (Wi-Fi) App For Android
FINALCAM (Wi-Fi) APP FOR ANDRIOD The Wi-Fi function allows you to use your smartphone to view videos during recording, adjust the BikeCam settings, control the basic functions (record, play, pause, etc.) and playback videos directly to your smartphone or tablet. The FinalCam App is available for free download from Google Play for Android smartphones.
Page 28 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Turn on the BikeCam Wi-Fi To turn on the Wi-Fi function on the BikeCam, go to the General Settings menu (press menu twice), select 'Wi-Fi' and press OK. The 'On' option will be highlighted, press the OK button to confirm. The menu window will close and the 'AP Mode' (Access Point Mode) window will open, as shown below.
Page 29 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Connect your phone to the BikeCam To connect your phone to the BikeCam open the Wi-Fi connections menu on your phone, the BikeCam will be shown in Wi-Fi networks list as 'RIDE*******'. Tap on the 'RIDE******' and when prompted enter the password '12345678'. Once successfully connected the 'WiFi Connected' window will appear on the BikeCam screen, as shown below.
Page 30 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Using the FinalCam App Open the App by tapping on the FinalCam button on your phone, the first time the App is opened the 'Please click “+” to add camera' screen will appear, see image below. Pictures Settings Tap on the '+' button, select 'RIDE******' from the available networks, as shown below.
Page 31 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) The key below describes the various information, functions and features available within the FinalCam home screen. Pictures Settings 1. Camera name 2. Open camera Tap here to control the BikeCam. 3. Remove camera Tap here to remove the BikeCam from the FinalCam App. 4.
Page 32 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Continued from previous page. 5. Camera Settings: Camera Name (SSID) – Change the SSID from the default setting of 'RIDE*******' and press the save icon. Password – Change the Password from the default setting of '12345678' and press the save icon. Note: - Changing the SSID or Password will disconnect the BikeCam from your phone, simply re-connect using the new details.
Page 33 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Continued from previous page. 6. FinalCam settings Storage Management - Manage the storage capacity of files downloaded from the BikeCam to the Final Cam App. Language – Select language used within the FinalCam App. About –...
Page 34 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Basic operation Tap the 'Open camera' button on the home screen to start using the BikeCam. Please see below for a guide to the functions and features available when using the FinalCam App. Note: - Tap on the live image screen to bring up the menu selection as shown below.
Page 35 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Continued from previous page. 8. File List Tap to open the file list, this will list recordings or image that are stored on the memory card and have yet to be downloaded to your phone. 9.
Page 36 FINALCAM (Wi-Fi) APP FOR ANDRIOD (CONTD.) Playback of video files Once a recording has been downloaded from the BikeCam to you phone you can use the FinalCam App to playback the recording. 1. Filename The filename of the recording being viewed. 2.
Page 37: Finalcam (Wi-Fi) App For Ios
FINALCAM (Wi-Fi) APP FOR iOS The Wi-Fi function allows you to use your smartphone to view videos during recording, adjust the BikeCam settings, control the basic functions (record, play, pause, etc.) and playback videos directly to your smartphone. The FinalCam App is available for free download from the App Store for Apple smartphones. Installing the App on an iOS smartphone: Open the App Store on your iOS smartphone and search for the 'FinalCam' App, tap on 'Get' to install.
Page 38 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Turn on the BikeCam Wi-Fi To turn on the Wi-Fi function on the BikeCam, go to the General Settings menu, select 'Wi-Fi' and press OK. The 'On' option will be highlighted, press the OK button to confirm. The menu window will close and the 'AP Mode' window will open, as shown below.
Page 39 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Connect your phone to the BikeCam To connect your phone to the BikeCam open the Wi-Fi connections menu on your phone, the BikeCam will be shown in Wi-Fi networks list as 'RIDE*******'. Tap on the 'RIDE******' and when prompted enter the password '12345678', once successfully connected the 'WiFi Connected' window will appear on the BikeCam screen, as shown below.
Page 40 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Using the FinalCam App Open the App by tapping on the FinalCam button on your phone, the first time the App is opened the 'Please add a camera' screen will appear, see image below. Pictures Settings Tap on the '+' button, the 'Camera is connecting…' and then the 'Add device successful' screens...
Page 41 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) The key below describes the various information, functions and features available within the FinalCam home screen. Pictures Settings 1. Camera name 2. Open camera Tap here to control the BikeCam. 3. Remove camera Tap here to remove the BikeCam from the FinalCam App. 4.
Page 42 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Continued from previous page. 5. Camera Settings: Camera Name (SSID) – Change the SSID from the default setting of 'RIDE*******'. Password – Change the Password from the default setting of '12345678'. Note: - Changing the SSID or Password will disconnect the BikeCam from your phone, simply re-connect using the new details.
Page 43 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Continued from previous page. 6. FinalCam settings Storage Management - Manage the storage capacity of files downloaded from the BikeCam to the Final Cam App. General – Turn on / off the 'Save to Album' option, when turned On images that are downloaded from the BikeCam will be saved in both the FinalCam directory and also your 'Camera Roll' album.
Page 44 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Basic operation Tap the 'Open camera' button on the home screen to start using the BikeCam. Please see below for a guide to the functions and features available when using the FinalCam App. Note: - Tap on the live image screen to bring up the menu selection as below.
Page 45 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Continued from previous page. 8. File List Tap to open the file list, this will list recordings or image that are stored on the memory card and have yet to be downloaded to your phone. 9.
Page 46 FINALCAM (Wi-Fi) APP FOR iOS (CONTD.) Playback of video files Once a recording has been downloaded from the BikeCam to you phone you can use the FinalCam App to playback the recording. 1. Back button Tap here to return to the previous screen / menu. 2.
Page 47: Mass Storage & Pc Camera
When this option is selected, the BikeCam will function as a card reader for your MAC. The ‘NEXTBASE’ external USB disk icon will appear on your MAC and you will be able to view / manage stored files upon the MicroSD card within the BikeCam, from your Mac.
Page 48: Playback Software For Windows
- NBDVR-RIDE Driving Recorder Player for Windows - NBDVR-RIDE Driving Recorder Player for Mac Note: - The instruction manual and installation files are all available for download from the Nextbase website: www.nextbase.co.uk, if required. Should you experience any difficulties during installation please do not hesitate to call our English speaking technical support team on +44 (0)2920 866429, lines are open during normal business operating hours: 09:00-17:30hrs.
Page 49 DRIVING RECORDER PLAYER FOR WINDOWS (CONTD.) INSTALLATION: Open the ‘NBDVR-RIDE Driving Recorder Player for Windows' folder and then open the folder with required version based upon your preferred speed units (MPH or KMH). Run the ‘setup.exe’, for some operating systems a security warning may appear, click ‘RUN’ to proceed.
Page 50 DRIVING RECORDER PLAYER FOR WINDOWS (CONTD.) If your PC already had 'Microsoft.NET Framework 4.0 Client' installed then the 'Welcome to the InstallShield ….' window will open, as shown below. Press 'Next' to continue, the 'License Agreement' window will open, as shown below. Check the 'Accept' button and press 'Next' to proceed.
Page 51 DRIVING RECORDER PLAYER FOR WINDOWS (CONTD.) The 'Destination Folder window will open, ’ as shown below. Choose a destination folder should you not want files saved to the default folder within the Program Files directory. Press 'Next' to proceed, the 'Ready to Install the Program' window will open, as shown below. Click ‘Install’...
Page 52 DRIVING RECORDER PLAYER FOR WINDOWS (CONTD.) The 'Installing Driving Recorder Player' window will open. During installation the status window will be on screen, as shown below. Once installation is complete the 'InstallShield Wizard Completed' window will open, as shown below. Installation now is complete, press 'Finish' to close the InstallShield Wizard window.
Page 53 BikeCam to your PC and use these for playback. - Early Windows operating systems may require installation of video codec software to enable video playback. Please visit http://www.nextbase.co.uk to download the 'PC Codec Pack (PC version)', installation instructions are also available within the downloaded file.
Page 54 DRIVING RECORDER PLAYER FOR WINDOWS (CONTD.) FEATURES & CONTROLS The key below explains the various information displayed within the Driving Recorder Player when using a Windows platform. 13/08/2013 14:08:44 NBDVR-RIDE AB12 3456 29MPH N 51 35 32.72 W 3 58 16.93 X: -0.03 Y: -1.06 Z: 0.16...
Page 55 DRIVING RECORDER PLAYER FOR WINDOWS (CONTD.) 10. Driving Recorder Player controls Screen Capture, this will create a still image for each frame of the image seen within the playback window. Open screen capture folder. Browse for files stored on your computer. Open settings window, adjust language and unit of speed.
Page 56: Playback Software For Mac
- NBDVR-RIDE Driving Recorder Player for Windows - NBDVR-RIDE Driving Recorder Player for Mac Note: - The instruction manual and installation files are all available for download from the Nextbase website: www.nextbase.co.uk, if required. Should you experience any difficulties during installation please do not hesitate to call our English speaking technical support team on +44 (0)2920 866429, lines are open during normal business operating hours: 09:00-17:30hrs.
Page 57 Alternatively, once the required Driving Recorder Player software has been downloaded from the Nextbase website open the 'Downloads' folder on your Mac. The software is saved in a compressed (.zip) folder, free de- compression applications are readily available, for example 'The Unarchiver' available from the Mac Appstore.
Page 58 DRIVING RECORDER PLAYER FOR MAC (CONTD.) The Driving Recorder Player 'volume' can now be ejected, right-click, select Eject 'Driving Recorder Player” and right-click once more, see image below. The 'Driving Recorder Player' can also be found within the Applications List, see below. At this point may also want to drag a copy onto your desktop, this can then be used as a desktop shortcut or placed on your Dock.
Page 59 DRIVING RECORDER PLAYER FOR MAC (CONTD.) USING THE DRIVING RECORDER PLAYER: Connect the BikeCam to your Mac using the supplied USB cable and select Mass Storage by pressing ‘OK’ on your BikeCam. Alternatively remove the MicroSD Card from your BikeCam and using a suitable MicroSD adaptor insert it directly to the card reader on your mac.
Page 60 DRIVING RECORDER PLAYER FOR MAC (CONTD.) FEATURES & CONTROLS The key below explains the various information displayed within the Driving Recorder Player when using a Mac platform. Driving Recorder Player Version 1.0 51 35 32.72 3 58 16.93 FILE LIST 13/08/2013 14:08:44 NBDVR-RIDE AB12 3456 29MPH N 51 35 32.72 W 3 58 16.93 FILE INFO Locked:...
Page 61 DRIVING RECORDER PLAYER FOR MAC (CONTD.) Driving Recorder Player Version 1.0 51 35 32.72 3 58 16.93 FILE LIST 13/08/2013 14:08:44 NBDVR402G AB12 3456 29MPH N 51 35 32.72 W 3 58 16.93 FILE INFO Locked: Date: 2013-08-06 17:18:14 Location: /Users/David/Desktop/402G - videos/17150019.MOV REMOVE 10.
Page 62: Troubling Shooting
The Codecs upon your PC may not be compatible or the latest Recorder Player is jumpy. standard. Download the latest Codecs from: http://www.nextbase.co.uk The sound is not synchronised The Codecs upon your PC may not be compatible or the latest standard.
Page 63 MENU button. Downloading files from This is not a cause for concern, simply go to the settings within www.nextbase.co.uk Google Chrome and turn off the malicious software protection using Google Chrome results temporarily to download and install the software.
Page 64 TROUBLE SHOOTING (CONTD.) PROBLEM SOLUTION The LCD screen on my Not a serious issue. This is due to a combination of warm air inside BikeCam gets condensation the BikeCam and the cold air outside, especially whilst riding with inside. the wind chill. Leaving the BikeCam indoors overnight with the SD card slot uncovered in a dry environment will reduce the moisture inside the BikeCam.
Page 65 NOTES...
Page 66 NOTES...
Page 68 NBDVR-RIDE-IM-ENG-R01...