Message Please Reset The Treadmill Displayed; Description; Possible Causes; Possible Remedies - Precor P80 Service Manual
Console
Hide thumbs
Also See for P80:
- Operating and maintaining (160 pages) ,
- User manual (29 pages) ,
- Training manual (15 pages)
Table of Contents
Advertisement
Message Please Reset the Treadmill Displayed
Description
On a treadmill, the screen displays the message, Please Reset the Treadmill along with a graphic of the
stop switch.
Possible Causes
The Stop Switch lanyard has been pulled and the reset latch has been disengaged. The yellow button
1
will be raised on the dash.
The stop switch reset latch has been engaged, but not fully so.
2
The cable connecting the stop switch to the console is disconnected, loose, or damaged.
3
The stop switch is malfunctioning.
4
The lower board has failed.
5
Possible Remedies
Press down firmly the yellow button on the dash. The tread will reset itself shortly.
1
Pull the lanyard to disengage the reset latch. Press down firmly on the yellow button on the dash to
2
reset the treadmill.
Inspect the connections leading from the stop switch to the console. Ensure that the cables are secure
3
and undamaged.
Replace the lower board.
4
Replace the stop switch assembly.
5
© Precor Incorporated, Unauthorized Reproduction and Distribution Prohibited by Law
Page 102
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the P80 and is the answer not in the manual?
Questions and answers
جهاز السير بريكور لايعمل
The Precor P80 treadmill may not be working due to a non-recoverable boot error. If the system fails to initialize properly, it attempts to load backup software. If this process fails twice, a red triangle screen appears, indicating that recovery is not possible and the P80 console must be replaced. Additionally, issues such as network connection problems or disabled system settings could affect functionality.
This answer is automatically generated