Self-Cleaning - TurboChef Speedcook Use & Care Manual

Self-Cleaning

Note: The upper and lower ovens CANNOT
be self-cleaned at the same time.
Using heat up to 800° F, the oven will self-
clean the inside of the cook cavity in 3 1/2
hours. To initiate a self-clean cycle:
1. Make sure the cook cavity is empty and
remove the oven rack.
Note: Failure to remove the oven rack will
cause the rack to discolor.
2. Remove large particles and wipe
standing liquids/grease.
Note: Failure to remove large food particles
and wipe the oven down may result in smoke
while the oven is self-cleaning.
a. Removing the lower jetplate and
cleaning beneath it prior to performing
a self-clean cycle (Speedcook Oven
ONLY) is recommended.
3. From the Advanced screen under
Settings, select Self-Clean. Then choose
Self-clean Speedcook Oven or Self-
clean Lower Oven.
4. Tap Start.
CAUTION
During the self-clean cycle, the oven
door is locked and the oven surfaces can
become very hot.
5. To immediately terminate a self-clean
cycle, tap Cancel.
6. When the cleaning cycle is complete
and the oven has returned to a safe
temperature, the screen displays a
message and the oven sounds a tone and
powers down.
49