Related Manuals for Blackstar HT-MODULATION
Summary of Contents for Blackstar HT-MODULATION
- Page 1 HT-MODULATION VALVE MODULATION Owner’s Manual...
- Page 2 Warning! Introduction Important safety information! Thank you for purchasing this Blackstar HT-MODULATION valve effects pedal. Like all our products, this pedal is the result of Read the following information carefully. Save all countless hours of painstaking Research and Development by our instructions for future reference.
- Page 3 LFOs combined with a 120 degree phase difference. The features on the HT-MODULATION have been selected to be particularly suited to live performance and that is why we have Tremolo...
- Page 4 This is the main output in a mono set-up or the left hand signal for 4. Saturation use in a stereo set-up. If you use the HT-MODULATION in the effects loop of a guitar amplifier this is where to connect the effects By adjusting the drive to the high voltage valve circuit in the effect return signal to the amplifier.
- Page 5 Note: To change between Manual mode and Slow/Fast mode Weight: 1.3kg hold the switch down for 1 second. DC Adapter: ADA Series Supplied 15. DC Inlet For the input of the 22V DC / 1.1A adapter supplied. Always use a Blackstar approved adapter.
Need help?
Do you have a question about the HT-MODULATION and is the answer not in the manual?
Questions and answers