Changing The Filter - Jura F9 Instructions For Use Manual

Changing the filter

g T Turn the Rotary Switch until
displayed.
T Press the 'Use filter'
'Use filter'
T Press the 'Active' button.
T Press the 'Save' button.
'Saved' appears briefly on the display.
'Insert filter'
T Remove and empty the water tank.
T Open the filter holder and insert the filter cartridge into the
water tank, exerting slight pressure.
T Close the filter holder. It will click into place audibly.
E After two months, the filter will cease to work. Set the date on
the date plate on the filter holder in the water tank.
T Fill the water tank with fresh, cold water and reinsert the
tank.
T Press the 'Next' button.
'Switch open'
T Place a receptacle under the hot-water spout.
l T Turn the switch to the m position.
'Filter is being rinsed', water flows out of the hot-water
spout.
E You can interrupt rinsing of the filter at any time. To do this,
turn the switch clockwise. Turn the switch anticlockwise to
continue rinsing the filter.
E The water may be slightly discoloured. This is not harmful to
health and does not affect the taste.
Rinsing of the filter stops automatically after approximately
300 ml. 'Switch close'
y T Turn the switch to the ° position.
'Please select product'
now activated.
E After 50 litres of water have flowed through, the filter will
cease to work. Your JURA F9 will automatically prompt you to
change the filter.
'Maintenance settings'
button.
appears on the display.
appears on the display. The filter is
5 Maintenance
('6/7') is
37