Page 1
RIDERʼS MANUAL • Designed and manufactured by District®, equiped with Eagle Supply® wheels for Dominator® • Read and understand this manual prior to riding your Domintator® scooter. • Note: Product illustrations are used for assembly purposes only.
• Always wear safety equipment, helmet, knee topics. pads, elbow pads and shoes. Dominator® recommends that from time to • Adults must assist children in the assembly time you talk about the information in this and adjustment of this scooter.
KNOW YOUR SCOOTER Grips Handlebar Collar clamp Deck Headset Flex brake Fork Metal core wheels PARTS INSPECTION TOOLS INCLUDED Before you start, remove contents from box. Inspect the contents for scratches in the paint and/or dents that may have occurred during shipping. Your new scooter was partially assembled at our factory and there should not be any Allen wrench...
Page 4
Failure to properly install and tighten ahead, the bars square to the wheel the collar clamp may cause the rider and the Dominator logo facing the to lose control and fall. If you do not front, Use the 6mm Allen wrench to understand these instructions or the tight the clamp as shown.
Skateboard Replace worn or broken parts parks are not designed for scooters. with Dominator® spare parts only. Never ride in tra c or on the street and watch your surroundings for SAFETY GEAR pedestrians, bikers, boarders and skaters.
MAINTENANCE WHEELS AND BEARINGS COMPRESSION If your bar starts to shake or Under normal circumstances and move, it means that your conditions Eagle Supply® Wheels compression needs to be tighte- and bearings are maintenance ned. Tighten as explained in the free.
This warranty does not cover I) normal wear and tear; II) improper assembly; III) failure to perform or improper maintenance; IV) the installation of components, parts, or accessories not provided by Dominator®; V) damage or failure due to accident, misuse, abuse, or neglect; VI) labor charges for part replacement.
Need help?
Do you have a question about the Sniper and is the answer not in the manual?
Questions and answers