Related Manuals for Medicare Technology ENIGMA ENERGI+
Summary of Contents for Medicare Technology ENIGMA ENERGI+
- Page 1 ENIGMA ENERGI+ POWERCHAIR OWNER’S HANDBOOK Enigma Energi Owners Handbook Page 1 of 22 Part Code: Z20942...
-
Page 2: Table Of Contents
All Enigma powerchairs are manufactured to the highest standards and are CE compliant. Medicare Technology is an ISO 9001 and ISO 13485 accredited medical device manufacturer. The Enigma powerchair is a robust and visually appealing product whilst being a cost-effective solution to mobility problems. -
Page 3: Personal Safety
• Ensure that all modifications made to the powerchair are authorized by Medicare Technology. Unauthorised modifications may reduce the performance of the powerchair, invalidate warranty, or result in injury or damage. •... -
Page 4: Emergency Freewheel
PERSONAL SAFETY (CONTINUED) TURNING AND USING ON A GRADIENT GUIDELINES • Avoid sharp turns at high speed as this could result in the powerchair tipping over. This is especially relevant when turning on a gradient. • The powerchair has been designed for use on gradients up to 1 in 6 (10º). However, other factors such as the surface of the gradient or the attributes of the user can vary this figure. - Page 5 PERSONAL SAFETY (CONTINUED) The intensity of the interfering EM energy can be measured in volts per metre (V/m). Each powered wheelchair can resist EMI up to a certain intensity. This is called its “immunity level”. The higher the immunity level, the greater the protection.
-
Page 6: Parts Description
PERSONAL SAFETY (CONTINUED) 1. Do not operate hand-held transceivers-receivers, such as citizens band (CB) radios, or turn ON personal communication devices, such as mobile phones, while the Powerchair is turned ON. 2. Be aware of nearby transmitters, such as radio or TV stations, and try to avoid coming close to them. -
Page 7: Control Functions Operation
PARTS DESCRIPTION (CONTINUED) CONTROL FUNCTIONS OPERATION Battery Gauge On / Off Button Horn Speed / Profile Indicator Increase Speed / Profile Decrease Speed / Profile Joystick Control Panel (shown above) Enigma Energi Owners Handbook Page 7 of 22 Part Code: Z20942... - Page 8 Control Panel Joystick (see previous diagram) Charger and Programmer socket 1. Joystick. The primary function of the joystick is to control the speed and direction of the wheelchair. The further you push the joystick from the centre position the faster the wheelchair will move.
- Page 9 Speed / Profile Indicator. This shows the maximum speed of the wheelchair. The more LEDs are lit, the faster the maximum speed. The wheelchair can be configured to use drive profiles. However, this is not included by default. For more information about drive profiles, contact your dealer.
- Page 10 Display Notes The battery needs charging or there is a bad connection to the battery. Check the connections to the battery. If the 1 Bar connections are good, try charging the battery. The left hand motor has a bad connection. Check the connections to the left hand motor.
-
Page 11: Adjustments For Comfort
ADJUSTMENTS FOR COMFORT Adjusting the tautness of the seat To adjust the leg rests: and back canvasses: To attach the leg rest, slide the leg • Remove the cushions. rest on to the frame as shown in the • You will then see a number of diagram. - Page 12 ASSEMBLY, DISASSEMBLY AND TRANSPORTATION ASSEMBLING POWERCHAIR DISASSEMBLING THE FOR OPERATION POWERCHAIR TO TRANSPORT • Switch off the powerchair. • Unfold the powerchair and lock the • frame in position by pushing down Fold and remove the footrests by on the sides of the seat with the turning them backwards whilst palms of your hand.
-
Page 13: Battery Charging
BATTERY CHARGING CONNECTING THE BATTERIES, electrical parts MOTORS AND JOYSTICK connect through the VR2 power module mounted to MOTOR 2 side powerchair. Connect the powerchair up following the wiring diagram on the right. MOTOR 1 24V BATTERY SUPPLY JOYSTICK CONTROL VR2 POWER MODULE BATTERY CHARGER... - Page 14 BATTERY CHARGING (CONTINUED) CHARGER OPERATION • Both the charger’s LEDs will illuminate when charging. • The red LED is lit whenever the charger is switched on. • The other LED will illuminate when connected to the powerchair. • The other LED is lit amber when bulk charging and then green when trickle charging (after bulk charging has finished).
- Page 15 BATTERY CHARGING (CONTINUED) 8. Charge in a well ventilated space where it is not directly exposed to sunlight. Do not charge in surroundings where it is humid or damp. Do not cover whilst charging. 9. Do not charge in temperatures less than -10°C or higher than +50°C as the charger may not work well and the batteries or powerchair may become damaged.
-
Page 16: Care And Maintenance
CARE AND MAINTENANCE CLEANING THE POWERCHAIR There is a red LED present on the Wipe the powerchair as least once a charger to show operation. If this week with a damp cloth and dust the LED does not illuminate the charger powerchair and motors should they is faulty. -
Page 17: Service Record
SERVICE RECORD YEAR YEAR Service Dates Service Dates Controller Motors On/Off switch Wiring Joystick Mounting Joystick Gaitor Function Output Plug Noise Level Seal Commutator Cleaned Operation Brushes Dynamic Braking Upholstery Static Braking Seat Batteries Back Type(SLA/AGM/Gel) Armpads Container Electrics Connections Condition of Loom Wiring Audible Warnings... -
Page 18: Warranty
7. The above warranty conditions apply to brand new powerchairs. Second-hand powerchairs supplied directly by Medicare Technology carry a six-month warranty period. If you are unsure whether your powerchair is covered contact your dealer. 8. Under normal circumstances, no responsibility will be accepted where the powerchair has required assistance as a direct result of: a. -
Page 19: Troubleshooting
TROUBLESHOOTING Symptom Possible Remedies Chair does not move Check the powerchair is turned on. after direction from Check the batteries are charged up. joystick Check all the connections are linked correctly. Check the manual brakes are not applied. Check the motors are in gear. Chair does not move Check the manual brakes are not applied. -
Page 20: Kerb Climber (Optional)
KERB CLIMBER The Energi powerchair is available with an optional kerb climber which allows the powerchair to mount kerbs up to 4” (100mm) high. The bracketry to fit the kerb climber is now available as standard with all new Energi powerchairs. The kerb climber is installed using the two ‘R’... - Page 21 Remark: The manufacturer reserves the right to modify the specification if necessary. The final specification is subject to the individual powerchair you purchase from your dealer. Enigma Energi Owners Handbook Page 21 of 22 Part Code: Z20942...
- Page 22 Your Energi powerchair is a Wheeltech branded product. Wheeltech is a brand of Medicare Technology Ltd. Other products in the Medicare Technology range include: For details of your nearest dealer, please contact: Medicare Technology Ltd, Ainleys Industrial Estate, Elland HX5 9JP.
Need help?
Do you have a question about the ENIGMA ENERGI+ and is the answer not in the manual?
Questions and answers