La Crosse WT-8005U Instruction Manual

Digital atomic wall clock

Table of Contents

Download this manual

BUTTONS

Get Started

Step 1: Insert 2 fresh AA, LR6 1.5 volt Alkaline batteries into the atomic

clock according to the polarity markings.

Restart: If the indoor temperature is not displayed after 60 seconds,

remove batteries from the atomic clock. Press any button on the atomic

clock 20 times. After 15 minutes, return to Step 1 above.

WT-8005U

www.lacrossetechnology.com/support

Digital Atomic Wall Clock

Time, Alarm +

WWVB Icon

Indoor Temperature,

Weekday, + Date

2-AA batteries

Model: WT-8005U

Instruction Manual

DC: 081215

Page | 1

Table of Contents

Do you have a question about the WT-8005U and is the answer not in the manual?

Page 1 Model: WT-8005U Instruction Manual DC: 081215 Digital Atomic Wall Clock Time, Alarm + WWVB Icon Indoor Temperature, Weekday, + Date BUTTONS 2-AA batteries Get Started Step 1: Insert 2 fresh AA, LR6 1.5 volt Alkaline batteries into the atomic clock according to the polarity markings.
Page 2 Press SNOOZE to silence an active alarm for 5 minutes.  The alarm icon will flash. This is a crescendo alarm that will sound for 120 seconds if not deactivated. Press any button to stop the alarm for 24 hours. WT-8005U www.lacrossetechnology.com/support Page | 2...
Page 3 Clean the battery contacts and also those of the device prior to battery  installation. Ensure the batteries are installed with correct polarity (+and -).  Remove batteries from equipment with is not to be used for an extended  period. Remove used batteries promptly.  WT-8005U www.lacrossetechnology.com/support Page | 3...
Page 4: Product Registration
Warranty and Support Information La Crosse Technology, Ltd. provides a 1-year limited time warranty (from date of purchase) on this product relating to manufacturing defects in materials & workmanship. View full warranty details online at: www.lacrossetechnology.com/warranty_info.pdf For warranty work, technical support or other information contact:...