Master/Slave Mode: Subwoofer Operation With Two Amplifiers - Hifonics Brutus BRX12000D Owner's Manual

BALANCED
INPUT LEVEL
L
MIN MAX
R
LINE IN
GND +12V
POWER INPUT
Connect Stereo RCA output (L/R or SUB OUT)
of the head unit with the LINE IN CH1/2
BALANCED
of the MASTER amp
INPUT LEVEL
L
MIN MAX
R
LINE IN
GND +12V
POWER INPUT
INTERCONNECTION MASTER
• Connect the RCA lineouts of the head unit with the RCA jacks LINE IN of the amplifier with appropriate high-value RCA cables.
If your head unit is equipped with a additional subwoofer lineout (SUB OUT), it is recommended to use this lineout.
• Connect the remote wire (REM) to the remote terminal (REM) of the MASTER amp.
• Connect the bass remote wire only on the REMOTE port of the MASTER amp.
INTERCONNECTION SLAVE
• Connect the RCA jacks SLAVE IN/OUT of the MASTER amp with the RCA jacks SLAVE IN/OUT of the SLAVE amp with appropriate
high-value RCA cables.
• Connect the remote wire (REM) of the remote terminal (REM) of the MASTER amp with the remote terminal (REM) of the SLAVE amp.
Use therefore cable with a minimum profile section of 0,5 mm
INTERCONNECTION SUBWOOFER
• Refer to page 24.
SETTINGS MASTER
• The MODE switch should be in MASTER position.
Refer to LP, SUB SONIC, PHASE, LEVEL, SUB BOOST, FREQ RANGE, Q-CONTROL and BASS REMOTE on page 22.
SETTINGS SLAVE
• The MODE switch must be in SLAVE position.
In the SLAVE mode all controllers of the SLAVE amp are without function.
Only the already modified audiosignal of the MASTER amp will be amplified.
FUNCTIONAL INSTRUCTIONS
INTERCONNECTION EXAMPLE

Master/Slave mode: subwoofer operation with two amplifiers

FREQ. SUB
PHASE RANGE Q-CONTROL BOOST SUB SONIC LP POWER
L
0° 180° 20Hz 80Hz WIDE NRW 0dB 18dB 15Hz 55Hz 35Hz 250Hz
PROTECT
EXTENDED BASS CONTROL BASS LEVEL
CONTROLLER
R
MASTER SLAVE
MODE
BRX 12000 D SLAVE IN/OUT
MASTER
+12V GND
Connect Bass Level
Controller with the
SPEAKER OUTPUT
enclosed cable
BRX 12000 D
FREQ. SUB
PHASE RANGE Q-CONTROL BOOST SUB SONIC LP
POWER
L
0° 180° 20Hz 80Hz WIDE NRW 0dB 18dB 15Hz 55Hz 35Hz 250Hz
PROTECT
EXTENDED BASS CONTROL BASS LEVEL
CONTROLLER
R
MASTER SLAVE
MODE
BRX 12000 D SLAVE IN/OUT
REM cable
+12V GND
SPEAKER OUTPUT
BRX 12000 D
Connect Stereo RCA output (SLAVE IN/OUT) of the MASTER
amp with the SLAVE IN/OUT of the SLAVE amp
LOGO
BADGE
BLUE
WHITE
LOGO
BADGE
BLUE
WHITE
.
2
BALANCED FREQ. SUB
INPUT LEVEL PHASE RANGE Q-CONTROL BOOST SUB SONIC
L
MIN MAX 0° 180° 20Hz 80Hz WIDE NRW 0dB 18dB 15Hz 55Hz 35Hz 250Hz
EXTENDED BASS CONTROL
R
LINE IN BRX12000 D
SLAVE
GND +12V
SPEAKER OUTPUT
POWER INPUT
BRX 12000 D
BALANCED
FREQ. SUB
INPUT LEVEL PHASE RANGE Q-CONTROL BOOST SUB SONIC
L
MIN MAX 0° 180° 20Hz 80Hz WIDE NRW 0dB 18dB 15Hz 55Hz 35Hz 250Hz
EXTENDED BASS CONTROL
R
LINE IN BRX12000 D
GND +12V
SPEAKER OUTPUT
POWER INPUT
BRX 12000 D
LP POWER
L
PROTECT
BASS LEVEL
CONTROLLER
R
MASTER SLAVE
MODE
SLAVE IN/OUT
+12V GND
LOGO
BADGE
BLUE
WHITE
LP
POWER
L
PROTECT
BASS LEVEL
CONTROLLER
R
MASTER SLAVE
MODE
SLAVE IN/OUT
+12V GND
LOGO
BADGE
BLUE
WHITE
23