Custom - Wireless Access Point - Panasonic TX-42AS650E Ehelp

4. Select Network Status
Network > Network settings > Network Status
5. Select Exit with
= Note =
When the network connection type is set to Wired,
●

Custom - Wireless Access Point

You can use the TV as a wireless access point and connect the network
equipment without an access point.
Confirm the PIN code, network settings of the equipment before starting
●
setup. For details, read the manual of the equipment.
1. Display the menu with MENU.
2. Select Network >
with / / /
3. Select Connect to device in WPS
To set manually, select
●
4. Select and set WPS(Push button)
access.
WPS(Push button):
Set up the equipment for
manual of the equipment.
WPS(PIN):
Enter the PIN code of the equipment.
If the connection has failed, check the settings and positions of the
●
equipment. And then, follow the on-screen instructions.
■
Change settings
You can set up Network
Channel setting method
Follow the on-screen instructions and set manually.
Set Reset settings
●
with / and press
/ and press OK to set.
Network Connection
and press OK to access.
with
Change settings
/ WPS(PIN)
WPS(Push
name(SSID), Encryption
manually.
to reset the items of
- 146 -
OK to access.
Wireless
> Custom > Wireless Access Point
/ and press OK
(see below).
with / and press
button). For details, read the
key, Wireless type
Change settings.
is deactivated.
to access.
OK to
and