Advertisement
C~
__________________
p_a_rt_s_l_d_e_nt_i_fi_c_at_io __ n __________________ )
(1) Disk drive
Equipped with one drive.
(2) Front door lever
Turn this lever to insert or remove the floppy dis.k.
(3) Disk slot
Insert the floppy disk through here.
(4) Busy lamp
Lights up when the drive is operating.
(5) Power lamp
Lights up when the power is on.
(6) Signal connector (upper)
Connects with the connecting cable.
(7) Signal connector (lower)
Connects with the extended cable.
(8) Power switch
The power is turned on when this switch is pressed in the "ON" direction.
(9) Power connector
Connects with the supplied power cord.
(10) Frame ground terminal
If ground is available, connect with a grounding wire.
@
--
Q)
El
0
E
IiI
~
CID
®
0
El
®
@
@
El
@
El
El
Front panel
Rear panel
-
2 -
®
Advertisement
