Rs422 Connections; Rs422 Connector Pinout - EVS XTnano Technical Reference

XTnano Server - Version 11.01 - Hardware Technical Reference Manual
5.5.

RS422 Connections

5.5.1.

RS422 Connector Pinout

The RS422 connectors are used to connect a remote control (from EVS or third party) to
your server.
The cable wiring is a straightforward pin-to-pin connection as illustrated in the following
diagram. You should use a shielded cable to avoid electromagnetic interference on long
distances.
The technical specification for the RS422 link is as follows:
◦
◦
◦
◦
5. Hardware Installation and Cabling
Warning
The RESET command line from the remote control is sent through the pin 5 of
the RS422 connector. This function should be disabled when the controller on
connector #1 is not an EVS controller.
19200 bauds
No parity
8 data bits
1 stop bit
25