Safety
"ISOFIX" mountings
Your vehicle has been approved in accordance with the latest ISOFIX regulations .
The seats shown below are fitted with regulation ISOFIX mountings.
There are three rings for each seat.
-
Two rings A, located between the vehicle
seat back and cushion, indicated by an
ISOFIX marking.
208
-
A ring B located in the boot (indicated by a
marking), referred to as the TOP TETHER
for fixing the upper strap.
The top tether is used to secure the upper strap
of child seats that have them. This limits the
forward tipping of the child seat in the event of
a frontal impact.
Do not use the luggage retaining net
rings, located at the edges of the boot
floor.
This ISOFIX mounting system provides fast,
reliable and safe fitting of the child seat in your
vehicle.
The ISOFIX child seats are fitted with two
latches which are easily secured on the two
rings A .
Some also have an upper strap which is
attached to ring B.
Need help?
Do you have a question about the 308 and is the answer not in the manual?
Questions and answers