Software Upgrades - Philips HTB3560/12 Service Manual

1. There are 2 ways to software upgrade:
First :
Upgrade from USB:
New a folder in root directory of USB and name it 'UPG'. Copy the
upgrade file HTB3560.BIN to the UPG directory then press the HOME
key on RC into HOME screen .Select 'Setup'‐>'Advanced'‐>'Software
update'‐>'USB' in order and then press OK key .
When upgrade file detected, select "Start" to upgrade, select
"Cancel" to cancel.
After upgrading begins, a message "Do not switch off" will show, or
the product will hang up and upgrading failed.
After you cancel, the product would return setting screen and the
software would not be upgraded.
Second:
Upgrade from Network:
Keep the product connect to internet. press the HOME key on RC
into HOME screen .Select 'Setup'‐>'Advanced'‐>'Software
update'‐>'Network' in order and then press OK key .
When upgrade file detected, select "OK" to download, select
"Cancel" to cancel. After the software is downloaded, select to
upgrade or cancel.
After upgrading begins, a message "Do not switch off" will show, or
the product will hang up and upgrading failed.
After you cancel, the product would return setting screen and the
software would not be upgraded.
2. Check the version information after upgraded.
Press the Home key on RC , select 'Setup'‐>'Advanced'‐>'Version
information' in order, and then press OK Key you will see a interface
like below:
Model:HTB3560/78
Version
SystemSW:x.xx.xx
Subsystem SW:xx‐xx‐xx‐xx
Ethernet MAC:xx:xx:xx:xx:xx:xx
EUI64:xx xx xx xx xx xx xx xx
For information,frequently asked question and software updates,visit
www.philips.com/support.
4-1
Software Upgrade
Close