Table of Contents
Advertisement
WyreStorm 4K Matrix
Solutions
Please read these instructions carefully before installing to avoid complications later.
US/CAN/MEX: +1-518-289-1294
MX-0808-4K
WyreStorm 8x8 4K HDMI 1.4 Matrix with Audio
Processor Including ARC support
Thank you for choosing this WyreStorm product.
Toll Free Technical Support: +1-844-280-WYRE (9973)
Instruction Manual
1
Advertisement
Table of Contents
Related Manuals for Wyrestorm MX-0808-4K
Summary of Contents for Wyrestorm MX-0808-4K
- Page 1 MX-0808-4K WyreStorm 4K Matrix Solutions WyreStorm 8x8 4K HDMI 1.4 Matrix with Audio Processor Including ARC support Instruction Manual Thank you for choosing this WyreStorm product. Please read these instructions carefully before installing to avoid complications later. US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
-
Page 2: Table Of Contents
Including multichannel digital audio and two-way control of source and display devices via RS232, RS485 and LAN, the i. Matrix control at matrix location (local) MX-0808-4K also offers manual EDID management for improved ii. Matrix System Code Switch communication between HDMI devices and greater compatibility during installation. -
Page 3: Safety Precautions
• 1U chassis size 5. Unplug apparatus from power supply during lightening • Can be used with any WyreStorm 4K extender product to storms or when unused for long periods of time. increase transmission distance or any WyreStorm DAC model... -
Page 4: Specifications
Voltage: ±1kV Cable Specifications NOTE: Cable types below are for reference only. This product is tested using WyreStorm HDMI cables - we recommend use of Wyre- Storm cables for guaranteed quality and reliability of transmission when dealing with UHD 4K content. -
Page 5: Front Panel Description
General Dimensions (W x H x D) 440mm × 42mm × 204mm / 17.3’’ × 1.7’’ × 8’’ Mass (Main unit) 2.3kg / 5.0Ibs Rack Space Required Certification CE, FCC, RoHS Front Panel Description Power switch - turns device ON/Off Output select buttons (left/right) - Selects output using the left /right selection button - Press ENTER to confirm LED input/output select screen - Displays matrix... -
Page 6: Connection And Operation
Both 4K and 1080p HD sources and displays may be contained within the same distribution – to screen is lit to indicate your WyreStorm system should combine 4K and HD sources/displays a WyreStorm now be fully connected and ready for use. -
Page 7: Front Panel Control
When the desired OUTPUT and INPUT is reached, push the ENTER button to confirm the selection. containing lower resolution legacy displays, a WyreStorm EXP-CON-4K-DD scaler and Dolby downmixer should The display will stop blinking to confirm the matrix has be used inline between HDMI devices to scale down 4K been set. -
Page 8: Matrix Ir Remote Control
/ next buttons are used to scroll between the matrix, the previous / next buttons are used to scroll between the In the event of two MX-0808-4K matrix units are installed pressing the left/right arrow buttons in each numbered matrix by pressing the left/right arrow buttons in each numbered 1-8 on the matrix. -
Page 9: Matrix System Code Switch
Send Message COM Port Connect State Serial control of the matrix via RS232 enables third party COM Port Select control systems to be integrated within a MX-0808-4K Connect/Disconnect from Matrix system. Output/Input Switch Select Previously Saved Output State 1, 2 or 3... -
Page 10: Connecting The Matrix To A Com Port
Set Panel introduction connected to the COM Control software - firmware version and creation date will be displayed in the window. Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... - Page 11 IP Settings The matrix can also be controlled over LAN, through which it may be accessed though Web GUI or Telnet after obtaining the matrix IP address. By default, the IP address to access the matrix is assigned automatically by the router or switch with a DHCP server.
-
Page 12: Vi. Audio Processor Control
Write. It is recommended this is done often if specific output EDID from particular display devices are frequently used. The MX-0808-4K features enhanced audio capabilities, including ARC (Audio Return Channel) and the capacity to extract optical and coaxial S/PDIF Digital Audio output from HDMI transmissions. - Page 13 HDMI IN will highlight red when selected. All 8 audio output ports can also be set to audio from a specific HDMI source using the drop-down selection option at the bottom of the screen. ARC Matrix Change Audio Source Enables the selection of either ARC or HDMI Input as audio source set to a specific Output.
-
Page 14: Input/Output Switch
The RS232 connection on the matrix is female DB9. Users can use a USB to UART cable or a direct serial cable for matrix control. See below for control system configuration. Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... - Page 15 NOTE All input/output boxes should contain code. If Configuration Example - Control Code Introduction Technical Support: support@wyrestorm.com US: +866 677 0053 EU: +44 (0) 1793 230 343 inputting manually, make sure there is no repetition of code. Using Output1 as an example to explain control code ‘\r’...
-
Page 16: Lan Control
Your browser will direct you to a Web Log in page to access the switching interface in your internet browser. x. LAN Control The WyreStorm MX-0808-4K can also be controlled via LAN over a network/web browser, offering integration protocols and full compatibility with market leading control systems such as AMX, Control 4, Crestron, RTI and WyreStorm Enado. -
Page 17: Xi. Telnet
of input ports (grey buttons) to output ports (blue/green For communication between devices to be made, and rows). successful connection achieved, devices must both request and send the required information. For example, Operation is the same as COMCTL – select an input a display will communicate 1080p capability with 2ch button 1-8 in each output section for selections to take audio, which the source device will accept and output the... -
Page 18: Copying Output Port Edid
Reboot the matrix. 4) Cable Joins – If using an extender set to lengthen transmission, joins in the cable run or RJ45 connectors Press the selection buttons on the matrix front panel Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... - Page 19 60Hz, try lowering to 50Hz) blank screen. Combined 4K / HD distributions - a WyreStorm EXP- 8) Electrical interference – Could any form of electrical CON-4K-DD scaler may be required between receiver and...
-
Page 20: Faq
Replace batteries if flashing is not seen on the digital camera screen. Use of MX-0808-4K EDID management to manually copy EDID from the AVR may be required. 3) Cable Issues – check or replace cables at source,... -
Page 21: Maintenance
- if combining 4K and HD sources and displays within • The unit has been exposed to rain. one system, use a WyreStorm EXP-CON-4K-DD scaling • The unit does not operate normally or exhibits a marked device between matrix and display to up/downscale change in performance. -
Page 22: Mail In Service
Parts and service not covered by this limited warranty are not the responsibility of the warrantor and should be Limited warranty period: This WyreStorm product is covered by a 2 year PARTS considered the responsibility of the individual. and LABOUR warranty. During this period there will be no charge for unit repair, replacement of unit components or replacement of product if necessary. -
Page 23: Glossary
WyreStorm will not be liable for any use of this information Glossary or any changes it may make to those products. The use of this information constitutes an agreement by the user to these limitations and exclusions. Acronym Complete Term... -
Page 24: Installation Reference Logs
Installation Reference Log INPUT Input Cable Number Source Location Source Details Source resolution/audio settings Number on Matrix OUTPUT Output Cable Number Display Location Display Details Source resolution/audio settings Number on Matrix Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343... - Page 25 Installation Notes US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
- Page 26 US: +1 844-280-WYRE (9973) UK:- +44 (0) 1793 230 343 Email: support@wyrestorm.com WyreStorm Technologies reserve the right to change physical appearance or technical specification of this product at any time. Visit wyrestorm.com for the latest information on products.. 0615 Technical support: support@wyrestorm.com...
Need help?
Do you have a question about the MX-0808-4K and is the answer not in the manual?
Questions and answers