Do you have a question about the AG56SW and is the answer not in the manual?
Questions and answers
Alice Christenson
March 13, 2025
Why does grill flame turn off by itself
1 comments:
Mr. Anderson
March 13, 2025
The Bush AG56SW grill flame may turn off by itself if the Flame Supervision Device (FSD) has just operated or if the gas burner has extinguished. In this case, wait for 90 seconds and re-ignite following the procedure in the manual.
Page 1
Operating Instructions – AG56SW Please keep for future reference AG56SW AG56SS AG56SB Important – Please read these instructions fully before using These instructions contain important information that will help you get the best from your appliance, ensuring safe and correct installation, use and maintenance.
Parts Safety Information Installation User instructions 7-10 Using the hob Using the oven and grill Cleaning and Maintenance 11-12 Cleaning and Maintenance 11-12 Transporting the cooker Trouble Shooting Technical Specifi cations 14-15 Injector table Guarantee Product code AG56SW AG56SS AG56SB...
Parts Customer Helpline: 0345 257 7271 If you have damaged or missing parts, call the Please familiarise yourself with the parts and accessories listed below 1. Pan supports x 2 9. Auxiliary burner 2. Gas burner 10. Ignition switch 3. Rapid burner 11.
Safety Information Customer Helpline 0345 257 7271 Important – Please read these instructions fully before installation Your appliance is produced in conformity with all WARNING - Accessible parts become hot during relevant safety regulations relating to electrical use, young children must be kept away. appliances.
Installation Customer Helpline 0345 257 7271 Positioning & electrical connection IMPORTANT - All Gas installations must be carried out by a suitably qualifi ed person. For information on choosing a gas installer contact the ‘Gas Safe Register’. For specifi c gas installation, refer to the separate installation guide.
Page 6
Installation Customer Helpline 0345 257 7271 Positioning & electrical connection IMPORTANT - Electrical connections must be carried out by a suitably qualifi ed person and in accordance with all relevant local building and installation regulations. Electrical connections This appliance is fi tted with fused plug which should be inserted into a suitable mains socket.
User Instructions Customer Helpline 0345 257 7271 Using the hob SERVICE AND TRANSPORT Ignition of the burners First identify the correct control knob by checking the symbols above each knob as shown in fi gure 3. Figure 3 Turn the control knob fully clockwise to the Figure 3 ‘Max’...
Page 8
User Instructions Customer Helpline 0345 257 7271 Using the hob Performance tips Always select pans that are correctly sized for the ring on which it is positioned to avoid unnecessary energy loss as shown in fi gure 6. To avoid accidental spillage, make sure pans are centrally positioned and avoid allowing handles to overhang.
User Instructions Customer Helpline 0345 257 7271 Using the oven and grill Using the grill pan and handle set WARNING - Always use an oven glove to protect your hand when using the grill, as the metal parts can become very hot! The grill pan has a detachable handle.
Use of your oven User Instructions Customer Helpline 0345 257 7271 Using the oven and grill Grill set up and use IMPORTANT - Before using the grill, make sure the heat shield is inserted in order to prevent damage and excess heating to the control panel and knobs.
Cleaning and Maintenance Customer Helpline 0345 257 7271 Cleaning and maintenance Changing the oven light CAUTION - Make sure the oven and hobs are turned off prior to commencing any cleaning. Make Before replacing the bulb disconnect the sure all parts have been allowed to cool to prevent appliance from the electrical supply.
Use of your oven Care and Maintenance Customer Helpline 0345 257 7271 Cleaning and maintenance Transporting the cooker Routine checks IMPORTANT – Before transporting the appliance, make sure the appliance has been disconnected Periodically inspect the gas connection pipe from both the gas supply and mains electricity and electrical connections to make sure there supply.
Trouble Shooting Customer Helpline 0345 257 7271 Basic troubleshooting before contacting service WARNING – If you smell gas, immediately turn of the gas supply at the mains and open all windows and doors to ventilate the area. Do not operate any electrical appliances including lighting switches and wall sockets. Call your authorised gas engineer.
Technical Specifications Customer Helpline 0345 257 7271 Model/Item AG56SW / AG56SS / AG56SB Power supply (230)V~/50 Hz Maximum power 10,3 Kw Size(H x W x D) 900x500x600 Net weight 38.5 Oven volume 52.5 lt We apologise for any inconvenience caused by any minor inconsistencies in these instructions , which may occur as a result of product improvemenst and development.
Need help?
Do you have a question about the AG56SW and is the answer not in the manual?
Questions and answers
Why does grill flame turn off by itself
The Bush AG56SW grill flame may turn off by itself if the Flame Supervision Device (FSD) has just operated or if the gas burner has extinguished. In this case, wait for 90 seconds and re-ignite following the procedure in the manual.
This answer is automatically generated