Installing A Maccon Card In A Macintosh Se/30 - Asante MacCon Family Ethernet Network Cards for the Macintosh Installation Manual

MacCon+ 30i
controller card
Expansion slot
Figure 2-15

Installing a MacCon Card in a Macintosh SE/30

!
Caution
Be very careful when you open the case and work inside the Mac-
intosh SE/30. If you are unfamiliar with opening the machine, consult
a trained technician.
Do not install the Asanté Math co-processor option. It will cause the
Macintosh to fail at start up or freeze during normal operation.
To install a MacCon3 IIsi, MacCon 30iE, or MacCon 30iET card in a
Macintosh SE/30, perform the following steps:
1
Power down the Macintosh. Disconnect and remove the
power cable. Lay the Macintosh SE/30 flat on its face.
2
Open the case very carefully and remove the access port
cover.
Installing Asanté MacCon Cards
Installing a MacCon+ 30i card in a Macintosh SE/30
MacCon+ 30i
daughter card
Motherboard
2-19