Speaker Wire Connections - M-Audio AV40 User Manual

|
4 Studiophile AV 40 User Guide
Acoustic/Traction Pads
In order to minimize vibrations and maximize
physical stability, we recommend you use the
1
provided acoustic/traction pads on the bottoms
of the Studiophile AV 40 monitors.
Speaker Wire
Connections
1
Use the transparent tinned bare wire cable
included in the Studiophile AV 40 package to
connect the Left and Right speakers via the red
/black spring-clip terminals on the back of each
speaker.
Connecting to a
Computer Sound Card
or Other Audio Output
Device
2
Before connecting the Studiophile AV 40
monitors, make sure the power from the computer
2
or other output device has been turned off and
the Studiophile AV 40 system is also turned off.
Connect the 1/4" or RCA input jacks to the
corresponding output connectors of a computer
sound card, portable music player, etc. You
can also use the black 1/8" stereo mini cable to
connect a secondary audio device to the "Aux"
input on the front of the Studiophile AV 40.
Setting the "Bass Boost"
EQ Switch
3
3
This 2-position switch provides a subtle increase
in bass response. The On mode increases
the low-frequency gain slightly via the woofer
and bass-reflex port. The Off mode produces
a natural, even response for most listening
conditions.
Please see Appendix C for the "Bass Boost"
frequency response curve.