JVC KW-NT500HDT Instructions For Use Manual page 135

LVT2366-001A
Additional information
Information about the additional feature and the speed pulse connection for KW-NT800HDT/KW-NT700/KW-NT500HDT/KW-NT300.
This sheet uses illustrations of the KW-NT800HDT/KW-NT700.
Additional feature: Using "NaviBridge"
"NaviBridge" is an iPhone application developed by DENSO to be used for interaction
with the car navigation system. You can search for location information using
"NaviBridge", and then forward it to the car navigation system as a destination
point. The location map displayed in "NaviBridge" can also be displayed on the car
navigation system.
For details about "NaviBridge", see http://www.globaldenso.com/en/products/
aftermarket/navibridge/index.html.
Send the location from "NaviBridge" to the system
1
Download "NaviBridge" from the App Store and install it.
2
Connect your iPhone to the unit.
• For connection, use USB 2.0 cable (accessory of the iPod/iPhone) or KS-U49
(not supplied).
• Be sure your iPhone is connected to the Internet.
3
Activate "NaviBridge" on the iPhone.
4
Transfer searched location from the iPhone to the system.
For the explanation of the transfer procedure, see the support site for
"NaviBridge".
The location you have searched for is displayed.
5
Select the route on the screen of the unit, then press [OK].
The guidance starts.
NaviBridge is a trademark or registered trademark of DENSO
CORPORATION.
Manipulate the map on the system from "NaviBridge"
When you connect your iPhone to the system, the map on the iPhone screen also
appears on the navigation screen. When you scroll the map on the "NaviBridge",
the map on the navigation screen also scrolls.
Zooming on the map is also shown on the navigation screen.
Scrolling
Zooming in/out
• When you scroll or zoom on the navigation screen, the map on the iPhone screen
does not change.
Notice: About the speed pulse connection
When the speed pulse is either disconnected or connected incorrectly, the
following symptoms may appear.
• "Adaptive Volume" function is not working
• "Speed Alert" function is not working
Other features may also not work properly, so be sure to correctly connect the
speed pulse.
ENGLISH