Eyeonet CAM-IP-9 series Quick Manual
  1. Manuals
  2. Brands
  3. Eyeonet Manuals
  4. Security Camera
  5. CAM-IP-9 series
  6. Quick manual

Eyeonet CAM-IP-9 series Quick Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Quick Manual
Eyeonet IP Cameras
Model: CAM-IP-9***(IPC model start with 9)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAM-IP-9 series and is the answer not in the manual?

Questions and answers

Summary of Contents for Eyeonet CAM-IP-9 series

  • Page 1 Quick Manual Eyeonet IP Cameras Model: CAM-IP-9***(IPC model start with 9)
  • Page 2 Check List 1. Hardware Connection Diagram 2. Setup IP cameras address to match local network 3. Change Time Zone 4.Enable Motion Recording 5. Add IP Cameras in NVR Page 2...
  • Page 3 TABLE OF CONTENTS Hardware Diagram Page 4 NVR W/POE NVR W.O/POE Page 4-#2 Page 4-#3 Page 5 Check Local Network 4CH NVR W/POE 8/16CH NVR W/4 POE Setup NVR IP address Page 6 First 4 IPCs W/POE Page 7-9 Setup IPCs address The Rest of IPCs W.O/POE Manually Assign Automatically Assign...

  • Page 4: Table Of Contents

    1.1 IP Cameras RJ45 Connection 1.2 Eyeonet NVR without POE Power/ Video ISP Connection Power/ Video Modem/Router Power/ Video ..Eyeonet NVR without POE POE Switch Power/ Video 1.3 Eyeonet NVR with POE Power/ Video Power/ Video Power/ Video Power/ Video...
  • Page 5 2.1 Check Local Network Range WARNING: NVR and IP cameras must be within the same local IP address #1. Using laptop or any PC in customer’s local network, Click on “Start” -> Type “cmd” ->Press Enter-> Type “ipconfig” -> Press Enter Windows 7/Vista Windows XP For example:...
  • Page 6 Model: Eyeonet standalone NVR WARNING: Eyeonet NVR default setting is DHCP. Please manually assign IP address tp NVR #1. NVR live view mode -> Right click and go to “Main Menu” -> “Setting” ->“Network” NVR IP address should be within Local Network Range...
  • Page 7 4. Preparing your PC/Laptop Eyeonet IP camera CAM-IP-9**** Default IP address: 192.168.1.108 #1. Change your PC/Laptop IP address to 192.168.1.XX to match IP camera address Type network and sharing Page 7...
  • Page 8 IPC address, you can choose any one works for you. 4.1 Method 1- Automatically change IPC address by ConfigTool Model: CAM-IP-9*** #1. Download “Configtool” from Eyeonet NVR website, http://www.ameta.ca/upload_files/download_file/EYEONET%20Config%20Tool%20V1.06_001.zip * This File must be unzip before use.
  • Page 9 WARNING: Plug IPC to switch to finish the setting, then one by one to void IP conflict. There are methods to change IPC address, you can choose any one works for you. 4.2 Method 2- Manually change IPC address by IE Model: CAM-IP-9*** #1.
  • Page 10 5. Install ActiveX Control in IE Browser Model: CAM-IP-9*** #1. Type IP camera address in Internet Explorer #2. For the first time to login IP camera, ActiveX control needs to be installed as below: *If having trouble in installing ActiveX, Go to IE ->“tool” -> “Internet Option” -> “set Prompt” to unsigned ActiveX Page 10...
  • Page 11 6. Eyeonet IPC Setting Model: CAM-IP-9*** * This setting only applies to one camera at one time. #1. Setup Motion function in IP camera #4. For SD Card Recording -> Location #2.Setup current time in IP camera For SD Card Recording ->...
  • Page 12 7.1 Add IPC to NVR W/POE Model: Eyeonet standalone NVR with POE #1. Connect IP cameras to NVR POE port directly, wait for 2-3 min, The link light (Green) and Activity (Yellow) light are flashing See All IP cameras in NVR live view.
  • Page 13 #2. Click on “IP search” -> the first 4 IP cameras will come up in the list Pick up all IP cameras which are using Eyeonet protocol -> click on “Add” * Each IP camera has 2 Protocol : ONVIF and Eyeonet, please choose “Eyeonet” for CAM-IP-9*** Others may choose “ONVIF”...
  • Page 14 7.3 Add 5-16 IPC to NVR W.O/POE Model: Eyeonet Standalone NVR WARNING: Avoid bit rate or FPS overload, we need to adjust the setting in NVR #1. Go to NVR Main menu -> “setting” -> “Encode” Change Frames and Bit rate for Regular Stream and Extra Stream...
  • Page 15 8. Add IPC/NVR in CMS Model: CAM-IP-9*** Model: Eyeonet Standalone NVR PSS software is available to download in our website “www.ameta.ca/support” http://www.ameta.ca/upload_files/download_file/PSSV4.06%20CMS%20Software_001.zip *This file must be unzip before use. Or find it from CD package #1. Open PSS software -> Device Manager-> Add NVR or IP camera information #2.

Table of Contents